Upgrading to Graphics. Need Help!

Skestu · Feb 25, 2017

Hey, I need help if this graphics will work on a 220 watts, I have ACER Aspire X3810
and My graphics card is : Intel GMA X4500 and It's been annoying, I can't play minecraft in high fps nor The Sims 1.

Will this graphics card work? : http://www.ebay.co.uk/itm/MSI-GT710-1GD3H-LP-NVIDIA-GeForce-GT-710-1-GB-Graphics-Card-PCI-Express-/201787085488?hash=item2efb7292b0:g:VMIAAOSw5cNYQwZt

Will it able to run minecraft and The Sims 4 etc.

This is the deets about the PC : http://acersupport.com/acerpanam/desktop/2010/acer/Aspire/AspireX3810/AspireX3810sp3.shtml

Thank you ^-^

MCID47 · Feb 25, 2017

Yes, it does work fine. You can even place mid-end GPU cards in there, such as GT730 or GT740 that have much better performance than 710 you've mentioned above. Also, you should get a better PSU, but never buy a cheap one. An EVGA 400W PSU wont hurt for your system https://www.amazon.com/EVGA-Warranty-Power-Supply-100-N1-0400-L1/dp/B00LV8TZAG . 220W just hold for a while, but not for long.

Skestu · Feb 25, 2017

MCID47 :

Look up my pc inside, The PSU is like a rectangle, I can't fit the PSU that you put the link. Ty :3

MCID47 · Feb 25, 2017

Skestu :

lol i forgot X3810 is a desktop builtup series

Just get a low-profile card (like you've mentioned above) that supposed to include a LP Bracket.

PS : (just an advise) This PC has a mini-ITX form factor. You can buy a m-ATX or mini-ITX case and move all your PC parts there, this would fit any modern PSU nowadays and most of the full-sized pcb GPUs.

Skestu · Feb 25, 2017

MCID47 :

Skestu :

lol i forgot X3810 is a desktop builtup series

Just get a low-profile card (like you've mentioned above) that supposed to include a LP Bracket.

PS : (just an advise) This PC has a mini-ITX form factor. You can buy a m-ATX or mini-ITX case and move all your PC parts there, this would fit any modern PSU nowadays and most of the full-sized pcb GPUs.

Thank you! :3 I will look for the case, I'm so happy that it will work! Thank you so much! lmao :3

MCID47 · Feb 25, 2017

Wait a second, does your motherboard support the x16 PCIe ?
because X3810 and X5810 still confuse me

Skestu · Feb 25, 2017

MCID47 :

Skestu :

lol i forgot X3810 is a desktop builtup series

Just get a low-profile card (like you've mentioned above) that supposed to include a LP Bracket.

PS : (just an advise) This PC has a mini-ITX form factor. You can buy a m-ATX or mini-ITX case and move all your PC parts there, this would fit any modern PSU nowadays and most of the full-sized pcb GPUs.

Will this case, Work fine will the motherboard and parts? https://www.overclockers.co.uk/zalman-t1-plus-mini-tower-usb-3.0-black-ca-078-za.html

Skestu · Feb 25, 2017

MCID47 :

It does support it.

MCID47 · Feb 25, 2017

I think you need a longer case, your motherboard is slightly longer than i expected.

Skestu · Feb 25, 2017

MCID47 :

What kind? I don't want it to be that expensive. lol

Skestu · Feb 25, 2017

MCID47 :

What kind? I don't want it to be that expensive. lol

MCID47 · Feb 25, 2017

Skestu :

if i can guess, the motherboard will more likely to fit perfectly. The case come with 4 pre installed screw mounts, and your motherboard need at least 6 holes for mounting. the builtup motherboards sometimes is a mix from m-ATX and have a length of ATX Boards. Just make sure you can plug in the 20+4 pin power since its located very bad.

Skestu · Feb 25, 2017

Alright.

:3

Search

Upgrading to Graphics. Need Help!

Skestu

Prominent

MCID47

MCID47

Distinguished

Skestu

Prominent

MCID47

Distinguished

Skestu

Prominent

MCID47

Distinguished

Skestu

Prominent

Skestu

Prominent

MCID47

Distinguished

Skestu

Prominent

Skestu

Prominent

MCID47

Distinguished

Skestu

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page