No signal monitor after first time pc build boot

adex000 · Feb 26, 2017

Hi
Its my first time to build a computer so i dont much about it, i turn on the computer every thing works fine no weird sounds, but i cant see the screen on the monitor i tried hdmi cable on the motherboard and on the graphic card same result, anyone no how to solve it maybe i missing something

Computer Specs:
CPU: i7- 7700K
GPU: ASUS GTX 1080
MOTHERBOARD: ASUS Z270E GAMING
RAM: 16 8x2 Gb Ram Corsair Vengeance 3000Mhz DDR4
PSU: RM750i Corsair

Paul NZ · Feb 26, 2017

Look at the sticker on the mobo. Are the last 4 numbers on it 0604 or higher?

You have to remove the GPU to use onboard video

adex000 · Feb 27, 2017

Paul NZ :

Which Sticker ?

Paul NZ · Feb 27, 2017

The sticker thats on it. Theres probably only 1 with 4 numbers at the end of it

adex000 · Feb 27, 2017

Paul NZ :

sorry i am not following where is that sticker ?

Paul NZ · Feb 27, 2017

On the motherboard. Open the case if you installed it look at it

user11464 · Feb 27, 2017

first off you are overcomplicating your first start up. you want to eliminate as many variables as you can, so try this

remove gpu, disconnect all hard drives and optical drives, insert only 1 RAM stick(and make sure it is in the correct slot as listed in your manual, it's not always the first slot)

connect hdmi cable into the motherboards hdmi port, and turn the system on.

report back

adex000 · Feb 27, 2017

Paul NZ :

the number is 0505

Paul NZ · Feb 27, 2017

It needs a BIOS update then. If it's the Rog Strix Z270E Gaming mobo

Only way you can do that, is buy / borrow a CPU BIOS 0505 supports first. Flash the BIOS then put this CPU back in

Take it to a shop and ask them to do it

adex000 · Feb 27, 2017

Paul NZ :

cant i do it by myself cause i bought it from other country i cant go there

Paul NZ · Feb 27, 2017

Nope. It has to be going to update the BIOS. It wont because BIOS 0505 doesnt support that CPU

Only other option take it to a shop

adex000 · Feb 27, 2017

Paul NZ :

so you say i should install supported cpu first, then update the bios, then install my cpu, if so do you know which cpus is supported ?

user11464 · Feb 27, 2017

DRagor · Feb 27, 2017

It's kind of weird thing with those Z270E. After all, Asus page says BIOS 0604 is required for ALL supported CPU. It's either some kind of error on their page or what?

Search

No signal monitor after first time pc build boot

adex000

Prominent

user11464

Paul NZ

Polypheme

adex000

Prominent

Paul NZ

Polypheme

adex000

Prominent

Paul NZ

Polypheme

user11464

Notable

adex000

Prominent

Paul NZ

Polypheme

adex000

Prominent

Paul NZ

Polypheme

adex000

Prominent

user11464

Notable

DRagor

Polypheme

TRENDING THREADS

Latest posts

Moderators online

Share this page