New Graphics Card don't works

Robert_376 · Mar 1, 2017

Hi!

On beginning - sorry for my english.

I have bought brand new GTX 1050 Ti, new Motherboard, new CPU, but old RAM don't works with this CPU (CPU works with DDR3L or DDR4, i have DDR3). So i ordered DDR3L RAM, but before it will come, i have tried to change my old GT 520 GPU.

And there are problems:
I plugged on new GPU, install drivers - then Windows (7) was rebooting on log screen, or just black screen appeared. Tried to reinstall and install other drivers - the same result.
I have installed Windows 10 - when i logged on my screen started changing resolution, then standard - black screen or reboot (drivers wasn't installed).
I have installed drivers in Windows 10 Safe Mode, system started fine, but then i got Code 43 and no mouse pointer.
i have updated BIOS, still Code 43 or rebooting.

Specification:
PSU: Corsair CX600 (600W)
CPU: Now Intel E6600, i'll change it to G4560
Mobo: Now Asus P5G41T-M-LX (PCI 1.1 - maybe there is problem?), i'll change to MSI B150M PRO-VDH D3
GPU: GeForce GTX 1050 Ti (doesn't require 6-pin)
RAM: Now 4GB DDR3, i'll change it to 6GB DDR3L

Questions:
Where is a problem? Can this card be broken? Or maybe it is other hardware problem? If yes, will it work on new build? Please help!

hang-the-9 · Mar 2, 2017

I'm a bit confused what you are using with what. You have an old build, and are trying the new video card in it? Wait till you have your parts in, set it up, test the card in that build. If then it does not work, contact the card vendor. Your power supply is fine to run the 1050 but it may be failing, the CX is the lower model from Corsiar, they often end up with issues.

Robert_376 · Mar 3, 2017

There was some troubles with delivery and my RAM goes to another person.. really bad luck. It will come in next week, i think, so i'll let you know, when i plug it to new build.

dontlistentome · Mar 3, 2017

That motherboard does not have a UEFI bios, that could be the issue. New Nvidia cards seem to work mostly with UEFI and older motherboards can have problems. You'll know when you get your new motherboard since that one has UEFI.

Robert_376 · Mar 6, 2017

I've got first 4gb DDR3L RAM stick, but i have another problem. I can't boot pc, i think it is because of bios version. Fans are running, but nothing more, no POST. I'll try to get Skylake CPU and update bios. Does I5 6400 will run on this motherboard? And could this unsuccesfull boot broke my Kaby Lake CPU?

hang-the-9 :

That PSU is borrowed from my friend (since he has msi gaming notebook, he don't use pc), but i'll want to buy some PSU. I think.. 400W? It will be good? Would you recommend something cheap, but not from blacklisted PSU?

hang-the-9 · Mar 7, 2017

Robert_376 :

I've got first 4gb DDR3L RAM stick, but i have another problem. I can't boot pc, i think it is because of bios version. Fans are running, but nothing more, no POST. I'll try to get Skylake CPU and update bios. Does I5 6400 will run on this motherboard? And could this unsuccesfull boot broke my Kaby Lake CPU?

hang-the-9 :

That PSU is borrowed from my friend (since he has msi gaming notebook, he don't use pc), but i'll want to buy some PSU. I think.. 400W? It will be good? Would you recommend something cheap, but not from blacklisted PSU?

What parts are you using now, you have several things listed in your original post. What are you using with that video card? For a PSU, the Corsair CX-M is OK.

Robert_376 · Mar 7, 2017

dontlistentome :

Yes, there was a problem. On new board everything is ok.

hang-the-9 :

For now i am using:
PSU: Corsair CX600
Motherboard: MSI B150M PRO-VDH D3
CPU: Pentium G4560
GPU: GTX 1050 Ti
RAM: 6GB DDR3L
HDD: 7200RPM 500GB
and a DVD Drive.

That's all parts in my pc for now. I want to buy SSD in near future and add 4GB RAM (or replace 2GB for 4GB). There is a question: which is better - 10GB 1333mhz or 8GB 1600mhz? I'll have 2x4gb 1600mhz and 2gb 1333mhz (now i have 6gb, 4gb is downclocked to 1333mhz).

hang-the-9 · Mar 8, 2017

Robert_376 :

You said on the new board everything is fine, so are there issues now or not? Confused about your post even more now. You said the system would not boot, are you talking about the old setup there?

You are better off with a matched dual channel 8 GB of RAM than mixed 10 GB.

Robert_376 · Mar 8, 2017

On new board, but before bios update CPU don't worked. After bios update everything runs fine, there is no problems.
Thanks for all help!

Search

New Graphics Card don't works

Robert_376

Prominent

dontlistentome

hang-the-9

Titan

Robert_376

Prominent

dontlistentome

Glorious

Robert_376

Prominent

hang-the-9

Titan

Robert_376

Prominent

hang-the-9

Titan

Robert_376

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page