How to manualy overclock G.SKILL TridentZ RGB Series to (3200)? (8gb x 2) 16 GB

Toggle sidebar Toggle sidebar
I

Icon2341

Commendable
Jan 29, 2017
6
0
1,510
How Do i overclock this ram? its not running at 3200 and when i try to use XMP windows outputs Critical_error_Died error and wont boot windows 10 so that's why i want to do it manually.

F4-3200C14D-16GTZR

Specs: Intel i7 7700k, Asus Strix z270E, G.skill 16Gb (3200), Geforce GTX 1080, 750W powersupply
 
Solution
C
Tested Speed 3200MHz
Tested Latency 14-14-14-34-2N

1) Change Ai Overclock Tuner from [Auto] to [Manual].

2) Change DRAM Frequency setting from [Auto]. The Auto setting will give you 2133MHz.

3) DRAM Timing Control
First setting is CAS# Latency. This number is listed as 14. Change settings from [Auto]
Next setting is also 14
Third setting is 14
Fourth number is 34
DRAM COMMAND Rate is changed from [Auto] to [2N]

4) Memory is listed as using 1.35v DRAM voltage at tested speed of 3200MHz.
This setting is listed on page 33 of the manual. Leaving on [Auto] will only give 1.2v
Sort by date Sort by votes
C

Calvin7

Titan
Feb 19, 2013
11,725
334
76,490
Tested Speed 3200MHz
Tested Latency 14-14-14-34-2N

1) Change Ai Overclock Tuner from [Auto] to [Manual].

2) Change DRAM Frequency setting from [Auto]. The Auto setting will give you 2133MHz.

3) DRAM Timing Control
First setting is CAS# Latency. This number is listed as 14. Change settings from [Auto]
Next setting is also 14
Third setting is 14
Fourth number is 34
DRAM COMMAND Rate is changed from [Auto] to [2N]

4) Memory is listed as using 1.35v DRAM voltage at tested speed of 3200MHz.
This setting is listed on page 33 of the manual. Leaving on [Auto] will only give 1.2v
 
Upvote 0 Downvote
Solution
The_Staplergun

The_Staplergun

Estimable
Jan 30, 2017
1,395
0
2,960
Not trying to hijack the thread, I'd like clarification on the command rate and what it means.

Also in the Asus boards the middle two numbers are changed by the second setting. Theres only three numbers and then the command timing option.
 
Upvote 0 Downvote
L

LanzoCommando

Commendable
Feb 21, 2016
142
0
1,710


I'm having this problem on a Asus Prime z270-A board right now as well.

Can you clarify the COMMAND timing option Staplergun is asking about?
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom