ASUS Z170-DELUXE: VGA_LED light remains red.

Habib_4

Prominent
Mar 7, 2017
1
0
510
Hello, I'm building my second gaming PC, I'm getting this Q-Code error 62 = installation of the PCH Runtime Services on my motherboard. I don't know what that means but I've tried everything. I removed the graphics card just to see if it works still the same I cleaned the ram Swapit nothing wrong with that which is fine. I put the graphic card on to a different PCIE Slot, I took it a part and reconnect it nothing changed. Any ideas? Much appreciated.

i7-7700, 3.6 GHZ, 8MB Cache
Hyper x 32GB DDR4 2400 CL15

Picture :
http://prnt.sc/eh3kkr

CPU LED no red light which is good
DRAM LED no red light which is good
VGA LED stick-on red LED light which means something is wrong.
 
Solution
don't have your answer but be sure that not error B2 instead of 62 ? that's easily looked at wrong on a digital display ? [b2-62 ]

may be using a unsupported CPU under the bios that shipped on your board ??

http://www.tomshardware.com/answers/id-3303820/error-code.html

https://rog.asus.com/forum/showthread.php?90987-New-Build-Code-62-Error

http://www.tomshardware.com/answers/id-2924478/post-hang-build-vga-led.html

I seen that link and will say I had a few guys ended up having to rma there skylake cps back to intel after replaceing everything else that was all that was left that they did not replace [psu memory motheboards ect,,, ]

got there replacement cpu's back and all was good to go ?? [last ditch ]...
don't have your answer but be sure that not error B2 instead of 62 ? that's easily looked at wrong on a digital display ? [b2-62 ]

may be using a unsupported CPU under the bios that shipped on your board ??

http://www.tomshardware.com/answers/id-3303820/error-code.html

https://rog.asus.com/forum/showthread.php?90987-New-Build-Code-62-Error

http://www.tomshardware.com/answers/id-2924478/post-hang-build-vga-led.html

I seen that link and will say I had a few guys ended up having to rma there skylake cps back to intel after replaceing everything else that was all that was left that they did not replace [psu memory motheboards ect,,, ]

got there replacement cpu's back and all was good to go ?? [last ditch ]


list your full system build specs that may help to look in to things

https://linustechtips.com/main/topic/221454-error-code-62-installation-of-the-pch-runtime-services-info-below-help-please/

not much info out there on that ?? what is from bad cpu , bad card , bad/ incorrect bios ,bad motherboard ??



 
Solution