monitor "No Signal" problem!

Toggle sidebar Toggle sidebar
Z

Zaccool01

Commendable
Mar 15, 2016
13
0
1,510
Hi, so on my PC i have a problem where my pc will boot up ill use it and randomly it will say "no signal" and then the graphics card fans will stop spinning but the PC is still on as the CPU fan is still spinning, ive tried almost everything, looked in the bios for issues, checked power setttings!
Specs:
CPU:Core 2 Quad Q9400
PSU: 255W Dell
GPU:GT 610 1gb ddr3 EVGA
RAM: 4x DDR2 2gb sticks
HDD:1tb Seagate 7200rpm
 
Sort by date Sort by votes
R

Ravi Sankar

Distinguished
Sep 15, 2009
266
1
18,865
Remove the Graphics card, and clean both card and PCI-X slot (with drops of petrol)
Connect the Monitor to the iGPU, just to make sure that monitor is fine
If you could see display with iGPU, Go to BIOS and change configure PCIX as display source
Plugin the graphics card and connect the monitor to graphics card and check

All the best
 
Upvote 0 Downvote
Z

Zaccool01

Commendable
Mar 15, 2016
13
0
1,510


It didnt work :(
 
Upvote 0 Downvote
Z

Zaccool01

Commendable
Mar 15, 2016
13
0
1,510


Ok just done that ill see if this happens again ill report on if anything happens

 
Upvote 0 Downvote
atljsf

atljsf

Honorable
BANNED
Jun 17, 2015
4,910
46
12,990
remove the gpu, clean the slot, the whole pc should be a bit dirty i think

then reseat the gpu, connect monitor into the gt card, tunr pc on again

if the onboard one still generates signal, enter in bios and modify bios to show external gpu first or only
 
Upvote 0 Downvote
Z

Zaccool01

Commendable
Mar 15, 2016
13
0
1,510


Yeah just did that, ravi said to do it, so ill report later on if it messes up


 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom