- Mar 12, 2017
- 5
- 0
- 510
Howdy, I built my first pc the other day and ran into an issue that I couldn't Google my way out of. I read the boot checklist and nothing was resolved after completing it aswell.
So here we go,
I gave my pc power and switched it on, fans spinned, cd drive worked, everything was looking good! I then plugged it into my TV via hdmi. No picture was present. Then after about three minutes from start up it shutdown. And for the life of me I can't get it to power back on. I tried troubleshooting, reconnected wires, breadboarding, still nothing. Interestingly I felt heat from the mobos heatsink while I tested it during breadboarding. So it's receiving power but not powering on(maim power is on when testing and the pwr switch is located correctly).
Help would be greatly appreciated!
Psu: Rosewill Valens 600
Mobo: ASRock H110M-ITX/ac LGA 1151 mini itx
Cpu: Intel Core i5-6600K 6M Skylake Quad-Core 3.5 GHz LGA 1151 91W
Ram: G.SKILL NT Series 8GB 288-Pin DDR4
And lastly a 1tb corsair with a cheap opdrive.
So here we go,
I gave my pc power and switched it on, fans spinned, cd drive worked, everything was looking good! I then plugged it into my TV via hdmi. No picture was present. Then after about three minutes from start up it shutdown. And for the life of me I can't get it to power back on. I tried troubleshooting, reconnected wires, breadboarding, still nothing. Interestingly I felt heat from the mobos heatsink while I tested it during breadboarding. So it's receiving power but not powering on(maim power is on when testing and the pwr switch is located correctly).
Help would be greatly appreciated!
Psu: Rosewill Valens 600
Mobo: ASRock H110M-ITX/ac LGA 1151 mini itx
Cpu: Intel Core i5-6600K 6M Skylake Quad-Core 3.5 GHz LGA 1151 91W
Ram: G.SKILL NT Series 8GB 288-Pin DDR4
And lastly a 1tb corsair with a cheap opdrive.
Facebook
Twitter
Instagram