CPU only has a 2 pin and need a 6 pin for GPU

G1ngerN1nja

Prominent
Mar 14, 2017
6
0
510
Hey, I have a pre-built computer brought from a store. I recently brought a Gtx 1060 to upgrade, and i don't know how to connect it to the main CPU, (bearing in mind I know little to none about the subject). The gtx needs a 6 pin connection and that's my problem

i have looked around my computer a lot and have only found a 2 pin that used to connect to the motherboard (the two pin went into a 4 pin slot)
so do i buy a 4 to 6 pin converter and where do i plug that in - do i plug the converter into were my 2 pin is at the moment or is there somewhere else because i am very confused

thanks :)
 
Solution


EVGA has two 600W models out currently, both of which have 6+2 PCIE power supply cables/connectors. They will support the GTX 1060. That GPU consumes 120W, or 10A. The EVGA base 600W PSU has 49A on the 12V rail, so you'll be fine with that.

George Mulligan

Reputable
Sep 20, 2014
922
0
5,360
Not even sure if your GTX 1060 is compatible with your existing computer. What is it, and what are the existing components (CPU, motherboard, and PSU)? The 6 pin connection for the GTX 1060 is likely the auxiliary power connection on the GPU, which must connect to the power supply unit (PSU). If the PSU does not have such a connector available- it is unlikely it would have one on a store bought computer- then you'll also have to get a new PSU that does have the additional power connector available.
 

G1ngerN1nja

Prominent
Mar 14, 2017
6
0
510
ok now that you said that, it does seem likely, i brought the pc a while ago and will try to find the specs, i didn't do enough research at the time as i was only 13 and that's probably come back to haunt me - i'll try to get back with the specs
 


Your situation is the exception and not the rule.
Typically if the PSU does not have the right connectors for a GPU it is because it is not capibable of it.
A PSU with zero 6/8 pin connectors for GPU might power a 1050 or 750 but most certainly not a 1060.
 


On low quality PSUs the wattage on the sticker can be just that....ink printed on a sticker.
If a 500w or greater PSU does not have a single PCI-E plug for a GPU then that is a HUGE red flag that the power supply is not capabile of supporing the GPU. So trying to use it for gaming will almost always result in a fried computer. It might not happen immediatly but it will happen.
 

salerhino

Reputable
Mar 16, 2016
1,263
0
5,660


+ it might be wit hweird unstandard dimensions
 

G1ngerN1nja

Prominent
Mar 14, 2017
6
0
510



Thanks, but the thing is my bad motherboard, as far as i can see doesnt even have the molex things, also I only have one +12V
(for futher reference my power supply 'says' it has 480W max)
 

G1ngerN1nja

Prominent
Mar 14, 2017
6
0
510


Yeah I rang up the guys that sold the computer and they were very helpful, I think i will just return my graphics card and get the 1050 as a new power supply would cost another £40 ish that i wasn't expecting
 

G1ngerN1nja

Prominent
Mar 14, 2017
6
0
510
my other option is to upgrade my power supply, does anyone know if the EVGA 600W 80+ Certified ATX Power Supply(or the same but 500W) is compatible with my gtx 1060, I know the power supply comes with the six pin that i need but are they compatible (gtx 1060 needs about 500W),
thanks for all the help so far
 

George Mulligan

Reputable
Sep 20, 2014
922
0
5,360


EVGA has two 600W models out currently, both of which have 6+2 PCIE power supply cables/connectors. They will support the GTX 1060. That GPU consumes 120W, or 10A. The EVGA base 600W PSU has 49A on the 12V rail, so you'll be fine with that.

 
Solution