New Motherboard, 4 new sticks of RAM(all packaged together) PC only runs while 2 are installed

Toggle sidebar Toggle sidebar
C

criosage

Prominent
Mar 17, 2017
3
0
510
So I just finished a new PC build one of several I've constructed but I hit a stone wall, when I went to install my new sticks of RAM on my MoB(ROG Strix z270e) the pc would run without posting all fans going all LEDs lit and still no display or post. I tried installing a stick at a time, worked every time up to 2 sticks regardless of the slot I was using but as soon as I installed 3 - 4 it gave me the same issue
-ROG Strix z270e
-I7-7700K
-corsair vengeance LED(white) 32 GB (4 Dimms = 32GB)
-Kraken x52
-1TB sea gate 7200 rpm HDD(pending upgrade)
-Nvidia GTX 960(pending upgrade)
-EVGA supernova G1 650W
 
Solution
Zerk2012
I would manually set the timings,voltage to factory specks and set the speed to 2666 and try all the sticks if that works we can try for the rated 3000.
If not up the voltage to 1.37.
Sort by date Sort by votes
C

criosage

Prominent
Mar 17, 2017
3
0
510
CORSAIR Vengeance LED 32GB (4x8GB) DDR4 3000 (PC4-24000) C15 for DDR4 Systems - White LED https://www.amazon.com/dp/B01HKF4HVK/ref=cm_sw_r_cp_apip_bAkNZaOAmRQvU

I'm mostly saying this off memory since I'm in class but I believe it sets them to a frequency of 2133 I can check the voltage(which I have not touched but have thought it could be a problem that the dram dock isn't receiving enough power to run the sticks but just invade it's helpful the led's on the ram all light up when all 4 are installed)

 
Upvote 0 Downvote
C

criosage

Prominent
Mar 17, 2017
3
0
510
So I've done all 3 profiles each at 1.35 or 1.37 volts and it's still the exact same issue it's as if having 4 sticks is disabled(yes my entire system is up to date)
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom