My PC won't start up but case LEDs are on

Godofkings

Prominent
Mar 17, 2017
1
0
510
I recently assembled my PC with the following specs:
https://pcpartpicker.com/list/9RqcFd

So once I had put it together and wired it, my PC case would show any post whatsoever...I tinkered with the front io ports until I got the HDD led at the bottom two pins(looking at it from above,under the GPU) and the case light for the HDD lit up when I flicked the switch on the PSU. I then tinkered with the power led and got it to light up by plugging it two prongs up(so that there is a set of prongs between both). I have also tried plugging the power switch randomly in both position and direction but no matter what, when I power it, and press the power button...nothing happens PLS HELP!!!
 
Solution
1. Check to make sure your CPU Fan is plugged into the CPU fan header, PC's will not start unless there is something there. 2. Make sure the CPU and motherboard power connectors are firmly seated and locked 3. Make sure your RAM is installed in the correct slots and firmly seated with the pins locked.

Insomniac Jack

Respectable
Mar 22, 2016
632
0
2,160
1. Check to make sure your CPU Fan is plugged into the CPU fan header, PC's will not start unless there is something there. 2. Make sure the CPU and motherboard power connectors are firmly seated and locked 3. Make sure your RAM is installed in the correct slots and firmly seated with the pins locked.
 
Solution