Raid Setup Help

Toggle sidebar Toggle sidebar
I

Ivan_63

Prominent
Feb 17, 2017
13
0
510
I attempted raid 1. First i went into bios and change achi to raid in the sata configuration. Then i pressed ctrl + I and created a raid volume. Now i can not boot into windows. My OS is installed on my ssd but i created a raid with the 2 hdd in the computer.
I also pressed f8 to boot from my ssd but it didn't work. My ssd shouldn't be erased because i didn't set that up for raid.
I'm not sure what to do. Please help!
 
Sort by date Sort by votes
J

jdcranke07

Honorable
Feb 10, 2014
1,346
2
11,965


Make sure to change your boot device to the SSD. Did you receive any BSODs or error messages?
 
Upvote 0 Downvote
I

Ivan_63

Prominent
Feb 17, 2017
13
0
510


Yeah i did change the boot device to the ssd. I works when i change raid back to achi on the sata configuration.
 
Upvote 0 Downvote
J

jdcranke07

Honorable
Feb 10, 2014
1,346
2
11,965


Sorry, for this being way old at this point.

However, that sounds like you need to make sure your controller on the mobo is able to handle the number of drives you are attaching. Might just be the need for a BIOS update or another config option to be changed. From default settings, you should be able to set the SSD as a boot drive & set the two HDDs in a RAID0 or RAID1 w/ the CTRL+I menu & change ACHI to RAID to get up & running. This is assuming you're using the onboard RAID controller.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom