No SSD or HDD detected by BIOS or Windows 10 Install (SATA problem?)

joeyturner123

Prominent
Mar 18, 2017
9
0
510
Hi all,
FINALLY got my first buid running (yay!) and have just inserted a flash drive with windows 10 to install onto my SSD- except the SSD doesn't show up.

All parts are brand new from Amazon/Ebuyer, and are as follows:
SSD: Kingston SSDnow300 120GB
Mobo: Gigabyte GA-78LMT-USB3 (Rev 6)
CPU: AMD FX4300 Black Edition (with stock cooler)
Memory: HyperX Fury 8GB DDR3 1600MHz
PSU: Corsair VS550
Case: AvP EL03W Viper Mini Tower
(+ TP Link Network Adapter + Fractal Design R3 120mm Case Fan)

I noticed that the BIOS was originally in IDE mode, so have changed that to ACHI, and have also tried a standard seagate 1TB HDD from my old PC- that isn't detected. Could this be a sata problem?

Thanks in advance, quick replies would be very appreciated.
 
Solution
Then I'm suspecting your PSU.

Because, if it's a motherboard problem the SSD will feel warm to touch since SSD is getting power from PSU but not detected by MOBO. And same case with your old HDD but its also generates vibration when touched.

joeyturner123

Prominent
Mar 18, 2017
9
0
510


Yes. Tried other sata ports, and a few different SATA cables.
But no, no heat whatsoever from the SSD. Does this mean a faulty one? Even though my system didn't recognise the old HDD either.

 
Then I'm suspecting your PSU.

Because, if it's a motherboard problem the SSD will feel warm to touch since SSD is getting power from PSU but not detected by MOBO. And same case with your old HDD but its also generates vibration when touched.
 
Solution

joeyturner123

Prominent
Mar 18, 2017
9
0
510


Thanks. Will return my PSU swiftly and get a replacement, will let you know the result.
 

joeyturner123

Prominent
Mar 18, 2017
9
0
510


That would be ideal i know, but i don't think anyone i know has built their computer and i'd be ruining the warranty on their systems if i was to go inside. Plus, not sure they'd trust me anyways :/ :D
 


If you know someone or have friends at the computer shop, this thing should be easy to do.
Just tell them "I need to borrow a PSU to test my system" EZ.
This is what I always do to troubleshoot my PC if I don't have spare components. :D