GPU doesn't fit

Toggle sidebar Toggle sidebar
H

Hernan_3

Prominent
Mar 19, 2017
2
0
510
Hi, i bought these:
- gigabyte h270 gaming 3
- asus strix gtx 1060
- thermaltake versa n26
first time build. gpu doesnt fit, anybody can suggest a solution?
 
Solution
Harsh_11
Your case can accommodate that gpu. You maybe installing it wrong. Remove two backplate from where the ports on graphics card will come out, insert the card and it will snap into place. Tighten the screws.
Sort by date Sort by votes
J

jdcranke07

Honorable
Feb 10, 2014
1,346
2
11,965


Is it the case that is too small? Is there an obstruction in the way? Typically, if you GPU is too large for a case, then you either need to mod the case or get a different one altogether. Otherwise, more than likely you need to arrange your accessory card to where it will fit, if this is your situation.
 
Upvote 0 Downvote
Harsh_11

Harsh_11

Commendable
May 9, 2016
186
0
1,760
Your case can accommodate that gpu. You maybe installing it wrong. Remove two backplate from where the ports on graphics card will come out, insert the card and it will snap into place. Tighten the screws.
 
Upvote 0 Downvote
Solution
Harsh_11

Harsh_11

Commendable
May 9, 2016
186
0
1,760
Ok I checked. You need to remove your HDD cage to fit the gpu. Your case can handle only 250mm cards with HDD cage and without it 360mm. The card is around 290mm. So you just need to remove the HDD cage and then install it.
 
Upvote -1 Downvote
H

Hernan_3

Prominent
Mar 19, 2017
2
0
510
Man I just feel bad heheh u were right I had only removed one backplate so it didn't fit, I would like to upload pictures to this forum but I just don't know how
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom