I decided to mod my Titan XP's with an EVGA 1070/1080 Hybrid Cooler using the Gamers Nexus method. The first mod went perfectly and I am seeing idle temps of around 25C and low 50's on load. The second, however, was not as smooth. After booting into Windows, the radiator fan ramps up and I see the GPU increasing temps to around 60C before I can turn the PC off.
http://i.imgur.com/7pW9gV0.jpg
At first, I thought the water block had poor contact with the GPU die, but I disassembled the card and applied fresh thermal paste. This unfortunately did not work and the problem still persists.
I'm not sure what to do.
http://i.imgur.com/7pW9gV0.jpg
At first, I thought the water block had poor contact with the GPU die, but I disassembled the card and applied fresh thermal paste. This unfortunately did not work and the problem still persists.
I'm not sure what to do.
Facebook
Twitter
Instagram