Will not boot after installing new cpu cooler

Toggle sidebar Toggle sidebar
I

Incept3d

Distinguished
May 9, 2016
14
0
18,510
As the title states I recently installed a H80i cooler. I was running great before the install.

Specs:
I7 4790k
MSI Gaming 5 mobo
GTX 1070
16gb ddr3 2x8gb
XFX 550w bronze

So with my specs I think I know what the issue is, I would just like confirmation. Anyway when I power on it runs for a few seconds and restarts. It doesn't hang on a code, it will reboot at 03 which is the early north bridge init or 55 when is early memory.

Is my power supply too low for the increased load of the cooler? Or did I possibly damage a component? I reseated my memory to no avail. Any input would be appreciated.
 
Solution
Kronima


Good luck, hope it works out :)
Sort by date Sort by votes
Kronima

Kronima

Honorable
Sep 16, 2016
106
1
10,815
Power supply shouldn't be an issue if it was working before. The power draw of the cooler is about 4.32 watts which is negligible. Did you plug the pump into the cpu fan header on your motherboard?
 
Upvote 0 Downvote
I

Incept3d

Distinguished
May 9, 2016
14
0
18,510
I did, the issue returned out to be a mistake on my half, I bent a pin on the motherboard and it seems to only affect dual channel memory, is will post when my ram is configured for single channel but will not post dual channel. Already looking at a new motherboad
 
Upvote 0 Downvote
I

Incept3d

Distinguished
May 9, 2016
14
0
18,510

I tried however I was unable to bend it back, I don't have tweezers small enough. I have an extended warranty through the store I bought it at so I can get a replacement.
 
Upvote 0 Downvote
Kronima

Kronima

Honorable
Sep 16, 2016
106
1
10,815


Good luck, hope it works out :)
 
Upvote 0 Downvote
Solution
I

Incept3d

Distinguished
May 9, 2016
14
0
18,510


Thanks mate
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom