Hello there. I was trying to do some basic overlocking with internet tutorials. I used program: Intel Extreme Tuning Utility. That's what I made:
Processor Core Ratio: 46x multiplier (4.58GHz)
Processor Cache Ratio: 44x multiplier (4.38GHz) - I've read that I should keep 1x or 2x multipliers below Core Ratio
Core Voltage: 1.350V
My maximum temperatures are 80°C at Stress Test. The problems are:
1. What should I do with VCore (I guess it should be lowered) to make it better and safier for more years?
* I tried to lower it to 1.30, but temperatures were the same, but they were raising much faster, than with my current 1.35 VCore. I've also tried to set Default (for a moment, to check out) or about 1.20-1.25, and temperatures were just about 65°C (much better than 80°C but I know that setting "Default" is completely dangerous).
AND
2. If I would like increase it to 48x (4.78GHz) or even 50x (4.98GHz) multiplier, what should I do with VCore and how should I test it to be sure I'm doing good? (Eg. First I should lower to 1.25VCore, then raise it by 0.05 and make new Stress Test everytime, and finally choose the best option).
* To be honest I would like to have at least 4.8-5.0GHz overlocked but I won't do it, for sure, without any help.
Please, give me some instructions to those 2 problems (questions). If problem nr 2 would be too risky for my computer, than jest help me with problem number 1 but I've read I could easily achive even 5.0GHz with no risk.
PS. My Power Suply is SilentiumPC Vero M1 600W 80Plus (SPC117) and I have 16 GB RAM DDR4.
Processor Core Ratio: 46x multiplier (4.58GHz)
Processor Cache Ratio: 44x multiplier (4.38GHz) - I've read that I should keep 1x or 2x multipliers below Core Ratio
Core Voltage: 1.350V
My maximum temperatures are 80°C at Stress Test. The problems are:
1. What should I do with VCore (I guess it should be lowered) to make it better and safier for more years?
* I tried to lower it to 1.30, but temperatures were the same, but they were raising much faster, than with my current 1.35 VCore. I've also tried to set Default (for a moment, to check out) or about 1.20-1.25, and temperatures were just about 65°C (much better than 80°C but I know that setting "Default" is completely dangerous).
AND
2. If I would like increase it to 48x (4.78GHz) or even 50x (4.98GHz) multiplier, what should I do with VCore and how should I test it to be sure I'm doing good? (Eg. First I should lower to 1.25VCore, then raise it by 0.05 and make new Stress Test everytime, and finally choose the best option).
* To be honest I would like to have at least 4.8-5.0GHz overlocked but I won't do it, for sure, without any help.
Please, give me some instructions to those 2 problems (questions). If problem nr 2 would be too risky for my computer, than jest help me with problem number 1 but I've read I could easily achive even 5.0GHz with no risk.
PS. My Power Suply is SilentiumPC Vero M1 600W 80Plus (SPC117) and I have 16 GB RAM DDR4.