- Feb 28, 2017
- 5
- 0
- 510
Hello guys,
I would like to ask you for an advice, I know that this topic was already discused in threads before but It didnt worked for me and my problem seems to be different.
Problem is, that my PC wont boot after I switched my memories to XMP profile. Windows starts to loading but then it freezes and I have to restart.
My specs are: (Mother board: ASUS Z270G with already upgraded bios, CPU: Core i7700K, Memory: KINGSTON HyperX Predator 3200Mhz 2x 8GB.
I found out, that my memory is not on the list with supporting memories, actualy there is memory HX432C16PB3K4/16 but mine is: HX432C16PB3K2/16...
Do you think that this might be the problem? System is stable when XMP is not active but I want to run it with XMP.. Or should I try some manual settings with timing and voltage? Thank you.
I would like to ask you for an advice, I know that this topic was already discused in threads before but It didnt worked for me and my problem seems to be different.
Problem is, that my PC wont boot after I switched my memories to XMP profile. Windows starts to loading but then it freezes and I have to restart.
My specs are: (Mother board: ASUS Z270G with already upgraded bios, CPU: Core i7700K, Memory: KINGSTON HyperX Predator 3200Mhz 2x 8GB.
I found out, that my memory is not on the list with supporting memories, actualy there is memory HX432C16PB3K4/16 but mine is: HX432C16PB3K2/16...
Do you think that this might be the problem? System is stable when XMP is not active but I want to run it with XMP.. Or should I try some manual settings with timing and voltage? Thank you.
Facebook
Twitter
Instagram