Hi guys
So I've built a custom desk with IKEA bits and have 3 legs to support the desktop on the cabinets.
I've mounted the centre leg towards the back middle, and am concerned that the front middle will sag with keyboard weight and leaning etc.
I was thinking about adding a steel support bracket. They are around 1 metre long and 3mm thick. Could i screwthis to the underneath of the worktop? The worktop is 246cm long and 28mm thick.
Will it be okay as it is?
Thanks in advance for any advice.
Pics below:
<a href="https://ibb.co/mbcfOv"><img src="https://preview.ibb.co/nPd9GF/20170403_221825.jpg" alt="20170403_221825" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>image uploader</a><br />
<a href="https://ibb.co/fH5Ziv"><img src="https://preview.ibb.co/mSTn3v/IMG_20170403_WA0006.jpg" alt="IMG_20170403_WA0006" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>image uploader</a><br />
https://ibb.co/fH5Ziv
https://ibb.co/mXZoAa
So I've built a custom desk with IKEA bits and have 3 legs to support the desktop on the cabinets.
I've mounted the centre leg towards the back middle, and am concerned that the front middle will sag with keyboard weight and leaning etc.
I was thinking about adding a steel support bracket. They are around 1 metre long and 3mm thick. Could i screwthis to the underneath of the worktop? The worktop is 246cm long and 28mm thick.
Will it be okay as it is?
Thanks in advance for any advice.
Pics below:
<a href="https://ibb.co/mbcfOv"><img src="https://preview.ibb.co/nPd9GF/20170403_221825.jpg" alt="20170403_221825" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>image uploader</a><br />
<a href="https://ibb.co/fH5Ziv"><img src="https://preview.ibb.co/mSTn3v/IMG_20170403_WA0006.jpg" alt="IMG_20170403_WA0006" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>image uploader</a><br />
https://ibb.co/fH5Ziv
https://ibb.co/mXZoAa