Packard Bell Onetwo L5700

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
S

say42

Honorable
Feb 20, 2012
22
0
10,520
Anyone with an idea of how to get the back off a OneTwo L5700 . Have removed 6 visible screws and the stand and have separated the two edges of the case by 1cm but they won't separate completely. I need to replace the hard disk

Am looking to see if there is an Acer equivalent but if anyone has any suggestions they would be appreciated.
 
Solution
S
Solved. The rear cover isn't one piece, with a bit of effort the central part can be removed to access the RAM slots. This also reveals 4 more screws holding the rest of the cover in place.

Inside the 3.5" hard disk is screwed onto the chassis using 3 screws. Unusually there is an earth strap stuck to the disk using tape.
Sort by date Sort by votes
S

say42

Honorable
Feb 20, 2012
22
0
10,520
Solved. The rear cover isn't one piece, with a bit of effort the central part can be removed to access the RAM slots. This also reveals 4 more screws holding the rest of the cover in place.

Inside the 3.5" hard disk is screwed onto the chassis using 3 screws. Unusually there is an earth strap stuck to the disk using tape.
 
Upvote 0 Downvote
Solution
S

say42

Honorable
Feb 20, 2012
22
0
10,520


Can't see how to upload a file but it's the bit that has the 'pb" logo on it
 
Upvote 0 Downvote
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom