New build old parts, getting 9c error with no USB device attached
SPECS: (all 2nd hand parts except the Mobo)
MSI 970A mobo
Gskill ripjaws ddr3 1600mhz
Nvidia 660TI
AMD FX 6300 (stock heatsink)
The problem:
I can't boot, or get into bios. when I power it up the cpu and gpu fans spin, my keyboard(s) flash that they have power, and the screen gets a signal (black screen), and 9c is visible on the bottom right of the screen. One of the boots I did had it change to 9D, other than that, it's always 9c. Online i have found that 9c is usually a usb fault, but not having any usb device connected, and resetting cmos (brand new board, did it anyway) didn't fix it.
What I have tried:
resetting CMOS by removing battery
GPU in both slots
All ram slots, with several different sticks of ram, one at a time (and without any ram in)
using a PS/2 port keyboard (and no keyboard/device connected at all)\
The build is currently benched, so nothing is plugged into the usb hubs.
SPECS: (all 2nd hand parts except the Mobo)
MSI 970A mobo
Gskill ripjaws ddr3 1600mhz
Nvidia 660TI
AMD FX 6300 (stock heatsink)
The problem:
I can't boot, or get into bios. when I power it up the cpu and gpu fans spin, my keyboard(s) flash that they have power, and the screen gets a signal (black screen), and 9c is visible on the bottom right of the screen. One of the boots I did had it change to 9D, other than that, it's always 9c. Online i have found that 9c is usually a usb fault, but not having any usb device connected, and resetting cmos (brand new board, did it anyway) didn't fix it.
What I have tried:
resetting CMOS by removing battery
GPU in both slots
All ram slots, with several different sticks of ram, one at a time (and without any ram in)
using a PS/2 port keyboard (and no keyboard/device connected at all)\
The build is currently benched, so nothing is plugged into the usb hubs.
Facebook
Twitter
Instagram