- Apr 6, 2017
- 1
- 0
- 510
Hello all!
I've been having trouble with my build that I put together recently. Sometimes when I hit the power button on my case the whole system will spool up, then quickly shut down. It will start up again and on the second attempt it always boots normally, (with the exception of the motherboard quickly cycling through error codes and then turning the error code light off). I'm wondering if it has to do with my PSU or what? Does anyone else with this specific model have similar issues?
My build:
6850k at stock (want to make sure this issue is solved before I overclock)
G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3300
ASRock X99 Taichi motherboard
EVGA GeForce GTX 1080 SC ACX 3.0 x2 in SLI with bridge
For cooling I'm using Kraken X62, boot drive is a m.2 intel ssd, additional drives are two samsung 850 evos in raid 0
Any insight on this would be greatly appreciated, I've searched high and low for answers but can't seem to find any. Thanks so much!
I've been having trouble with my build that I put together recently. Sometimes when I hit the power button on my case the whole system will spool up, then quickly shut down. It will start up again and on the second attempt it always boots normally, (with the exception of the motherboard quickly cycling through error codes and then turning the error code light off). I'm wondering if it has to do with my PSU or what? Does anyone else with this specific model have similar issues?
My build:
6850k at stock (want to make sure this issue is solved before I overclock)
G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3300
ASRock X99 Taichi motherboard
EVGA GeForce GTX 1080 SC ACX 3.0 x2 in SLI with bridge
For cooling I'm using Kraken X62, boot drive is a m.2 intel ssd, additional drives are two samsung 850 evos in raid 0
Any insight on this would be greatly appreciated, I've searched high and low for answers but can't seem to find any. Thanks so much!
Facebook
Twitter
Instagram