Rig:
Mobo: Asus P8Z77-V-PRO
Cpu: i7- 3770k
Gpu: Nvidia GTX 670 FTW
Ram:
Trident X 16GB
(F3-2400C10D-16GTX)
https://www.gskill.com/en/product/f3-2400c10d-16gtx
Os: Windows 7 Pro 64
Cooling: Watercooled
Programs: Core temp, Cpu-z, Prime95
link used \video : www.overclocknet/t/1291703/ivy-bridge-overclocking-guide-asus-motherboards
Hi, Im trying to overclock my Cpu, but i can barely get the ball moving because of an error i am unfamiliar with.
tried to get to 4.5hz
For a baseline :
My Bios settings are all set to auto, i run prime95 to test stability, everything works fine
following the video, it said to do a basic beginning test before changing the variables:
1.changing overclock to tuner to manual and leaving all to auto,
2. changing the ram timing to what is on the package which is 10-12-12-31-2N latency
3.memory frequency to what our ram can handle, that being 2400mhz for me.
4. dram voltage to 1.65
after completing those steps i run prime95 again, this time it doesnt run a complete test
i get the following error almost instantly:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
what does that mean?
after that, i followed the entire video, changing settings and just trying to add more vcore to get it to work. i went from 1.25 to 1.50 nothing changed, except for the additional bluescreen every now and then.
what should i try to do next?
Mobo: Asus P8Z77-V-PRO
Cpu: i7- 3770k
Gpu: Nvidia GTX 670 FTW
Ram:
Trident X 16GB
(F3-2400C10D-16GTX)
https://www.gskill.com/en/product/f3-2400c10d-16gtx
Os: Windows 7 Pro 64
Cooling: Watercooled
Programs: Core temp, Cpu-z, Prime95
link used \video : www.overclocknet/t/1291703/ivy-bridge-overclocking-guide-asus-motherboards
Hi, Im trying to overclock my Cpu, but i can barely get the ball moving because of an error i am unfamiliar with.
tried to get to 4.5hz
For a baseline :
My Bios settings are all set to auto, i run prime95 to test stability, everything works fine
following the video, it said to do a basic beginning test before changing the variables:
1.changing overclock to tuner to manual and leaving all to auto,
2. changing the ram timing to what is on the package which is 10-12-12-31-2N latency
3.memory frequency to what our ram can handle, that being 2400mhz for me.
4. dram voltage to 1.65
after completing those steps i run prime95 again, this time it doesnt run a complete test
i get the following error almost instantly:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
what does that mean?
after that, i followed the entire video, changing settings and just trying to add more vcore to get it to work. i went from 1.25 to 1.50 nothing changed, except for the additional bluescreen every now and then.
what should i try to do next?