I am trying to get 4 of the memory sticks i have working and I'm afraid of the motherboard or the slots are messed up. I'm wondering if there's any way to rule them out, because I'm not ready to give up on the motherboard yet.
Here is my Ram:
G.Skill RipjawsX F3-12800CL9D-8GBXL DDR3 - 1600 CL9-9-9-24 1.5v pc3 12800 4gx2 Intel XMP Ready. Barcode 154521004162109 it says they are from 2015 NOV
I bought two new ones and its the same exact specs except its from March 2017 Barcode 171314H00923211
Motherboard is:
Gigabyte GA-Z97X-SLI
Bios is:
Flash Memory Type: MXIC 25L64 Series
Flash Memory Size: 64M bits
Bios Sign on Message: Z97X-SLI F9
Bios Vender: AMI UEFI Bios
Cpu: Intel(R) Core(TM) i7-4790k CPU @4.00GHz 4.00GHz
My Operating system is 64bit Windows 10 home Edition
I saw that it might just be the two different rams not compatible with each other but that doesn't make since to me because they seem the same, and if their not I'm wondering if i can do something in the bios to make them work together.
I don't know anything about voltages and timing but I think you can change some of that in bios too.
I tried XMP mode but that didn't work
the symptoms are always the same it starts up beeps many times then reboots over and over. this is before you can enter the bios
I don't know if the motherboard is working in dual channel or single channel mode but it definitely says it supports dual channel. my manual says i can enable dual channel function on the motherboard bios but there is no setting to do so there, I was thinking it might not be set to a certain mode.
Ram lay out goes 1grey 3black 2grey 4black where 4 is closest to cpu both stick sets work on slot 1 and 3 but not in any other configuration
It's possible that the slots might be broken but so many people have the same problem that I'm thinking that's not the case but it acted the same when i first built the computer. I'm wondering if I can make sure a slot Isn't working right.
Any help would be awesome thanks.
Here is my Ram:
G.Skill RipjawsX F3-12800CL9D-8GBXL DDR3 - 1600 CL9-9-9-24 1.5v pc3 12800 4gx2 Intel XMP Ready. Barcode 154521004162109 it says they are from 2015 NOV
I bought two new ones and its the same exact specs except its from March 2017 Barcode 171314H00923211
Motherboard is:
Gigabyte GA-Z97X-SLI
Bios is:
Flash Memory Type: MXIC 25L64 Series
Flash Memory Size: 64M bits
Bios Sign on Message: Z97X-SLI F9
Bios Vender: AMI UEFI Bios
Cpu: Intel(R) Core(TM) i7-4790k CPU @4.00GHz 4.00GHz
My Operating system is 64bit Windows 10 home Edition
I saw that it might just be the two different rams not compatible with each other but that doesn't make since to me because they seem the same, and if their not I'm wondering if i can do something in the bios to make them work together.
I don't know anything about voltages and timing but I think you can change some of that in bios too.
I tried XMP mode but that didn't work
the symptoms are always the same it starts up beeps many times then reboots over and over. this is before you can enter the bios
I don't know if the motherboard is working in dual channel or single channel mode but it definitely says it supports dual channel. my manual says i can enable dual channel function on the motherboard bios but there is no setting to do so there, I was thinking it might not be set to a certain mode.
Ram lay out goes 1grey 3black 2grey 4black where 4 is closest to cpu both stick sets work on slot 1 and 3 but not in any other configuration
It's possible that the slots might be broken but so many people have the same problem that I'm thinking that's not the case but it acted the same when i first built the computer. I'm wondering if I can make sure a slot Isn't working right.
Any help would be awesome thanks.