Dear all,
I was build a new pc with this parts last night:
1. Motherboard : Gigabyte GA-Z270P-D3
2. CPU : Intel Core i7 7700K 4.2Ghz 8MB Cache s1151 - Tray
3. RAM: F4-2400C15S- 16GIS G.Skill Aegis 16GB DDR4 2400Mhz CL15 Kit (1 stick)
4. PSU : SeaSonic 600W Active PFC 80+ SS-600ET PSU
5. Cooler : CoolerMaster Hyper 212X CPU Cooler
6. Case : CoolerMaster K280 Mid Tower ATX Black Case No PSU
7. SSD : Samsung Evo 250 GB (I was use it for my laptop)
8. GPU: ZOTAC GEGORCE GTX 1070 Founders Edition
When I build it with manuals instructions systematically, the first time powered one, all okay, but cannot boot from my ssd (win 8.1 already installed),
When I Try to configure boot order and boot mode from BISO interface did not work, and did not boot from ssd!
I tryout to (activate secure boot from disabled to enable), request restart, immediately after this point, everything changed … every time trying to power one the pc they loop restart before BIOS screen, from 3-7 seconds, The screen did not show any thing! Moreover, no beep sounds!
I was try to remove the ram and when power on, I hear beep sound.
I was disconnect all things; SSD, graphic card, mouse, keyboard and no anything change!
I was try to remove the battery to 10 min and CLEAR CMOS, no any change.
I am witting a solution
Regards
I was build a new pc with this parts last night:
1. Motherboard : Gigabyte GA-Z270P-D3
2. CPU : Intel Core i7 7700K 4.2Ghz 8MB Cache s1151 - Tray
3. RAM: F4-2400C15S- 16GIS G.Skill Aegis 16GB DDR4 2400Mhz CL15 Kit (1 stick)
4. PSU : SeaSonic 600W Active PFC 80+ SS-600ET PSU
5. Cooler : CoolerMaster Hyper 212X CPU Cooler
6. Case : CoolerMaster K280 Mid Tower ATX Black Case No PSU
7. SSD : Samsung Evo 250 GB (I was use it for my laptop)
8. GPU: ZOTAC GEGORCE GTX 1070 Founders Edition
When I build it with manuals instructions systematically, the first time powered one, all okay, but cannot boot from my ssd (win 8.1 already installed),
When I Try to configure boot order and boot mode from BISO interface did not work, and did not boot from ssd!
I tryout to (activate secure boot from disabled to enable), request restart, immediately after this point, everything changed … every time trying to power one the pc they loop restart before BIOS screen, from 3-7 seconds, The screen did not show any thing! Moreover, no beep sounds!
I was try to remove the ram and when power on, I hear beep sound.
I was disconnect all things; SSD, graphic card, mouse, keyboard and no anything change!
I was try to remove the battery to 10 min and CLEAR CMOS, no any change.
I am witting a solution
Regards
Facebook
Twitter
Instagram