MSI B150M Mortar Arctic Board Problem

iAn_92

Prominent
Apr 20, 2017
3
0
510
When Im playing at high resolution my Screen would go black. A message would pop up on my screen No signal or something then would go black then back to the message and so on.

I bought a newer GPU from r9 280x to rx470 hoping it would fix the error, still the problem persist. PSU is also not the problem also bought a newer PSU.

When im playing on a lower resolution problem no longer exist. Hoping someone would help me.

PS. Pc doesnt restart it is still running but IDK if the PC froze or not since screen is at blank state.

Im using windows 10, b150m mortar actic board with latest bios, Sapphire rx470 and MSI r9 280x GPU with latest Driver.
 

iAn_92

Prominent
Apr 20, 2017
3
0
510


My monitor is very old almost 8yrs, its a 19 inch Samsung 932BW LCD Monitor with 60 refresh rates.
 

iAn_92

Prominent
Apr 20, 2017
3
0
510
i have fixed the problem, idk if it was the right move but it works. Playing for hours and no problem, what i did was change the voltage of the board from auto to its default value and same with the gpu, from auto to default.
 
What memory brand are you using and what it is its stock voltages ?
Reason why I ask if the voltages are abit too high for the set memory speed on the mobo.
Most msi boards I've had and ran into over the years flip out.
That will usually cause the mobo to not boot properly or not at all.
Sometimes you might have to wait a day or a week for it to reset itself before attempting the fix problem if possible.
That is the only thing I don't like about msi mobos, a person named ppmguire on the internet and a few others would swear at it because of this.