Solved

No display on monitor after changing ram frequency

As the titles says i have no signal to the monitor after changing my ram frequency. I have two 16 gig 1866 ddr3 ram. I noticed in my performance menu it was running at a lot less so I changed it in the bios. As soon as it reboot I have no display on monior. How do I fix this? Who should my frequency be set to given the ram that I have? How I get it to run proper frequency? How do I get signal back? HELP.
Reply to Jake218
7 answers Last reply Best Answer
More about display monitor changing ram frequency
  1. Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute).
    Reply to alexoiu
  2. alexoiu said:
    Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute).


    Do I need to do anything with the cmos 1 2 and 3 plug ins? I've done some research about it and that's what they said. Just try the battery tho? Not at pc atm
    Reply to Jake218
  3. Either the battery, or the jumper.
    Reply to alexoiu
  4. alexoiu said:
    Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute).

    Still no signal
    Reply to Jake218
  5. What method did you use? Was the power cord unplugged?
    Reply to alexoiu
  6. alexoiu said:
    What method did you use? Was the power cord unplugged?


    I switched it off and unplugged it. Took the battery out for minute, that didn't work. I also put the the thing on the left to pins for reset. Still nothing.i even changed proper ram slots. Nothing. I put the ram back. Nothing.
    Reply to Jake218
  7. Best answer
    Hard to say, then. A local pc repair shop might help.
    Reply to alexoiu
Ask a new question Answer

Read More

RAM Monitors Displays