First Time overclocking Amd Ryzen 1600

Toggle sidebar Toggle sidebar
M

mbnthat123

Commendable
Jan 28, 2017
54
0
1,630
I bought Amd Ryzen 1600
gigabyte b350m-D3h
corsair vengeance ddr4 16gb 3200mhz

I've never overclocked before anyone with experience can help me out?
 
Sort by date Sort by votes
NateTech

NateTech

Reputable
Jan 4, 2016
91
0
4,710
Hello!

Be sure that before you overclock the memory that you make sure you motherboard is updated to the lastest BIOS as I had issues with my kit of ram paired with the same CPU as you.

In terms of CPU overclocks, I'll have to get back to you on that, as I have not tinkered with any of those settings yet, but I will get back to you asap.

Hope this was of some help!
:)

- Nate of Ralleon Custom Built
 
Upvote 0 Downvote
M

mbnthat123

Commendable
Jan 28, 2017
54
0
1,630
Hey!

I have already flashed my bios to the latest. But i still cant achieve 3.6ghz stable, When i run occt cpu linpack it causes my cpu to hit 80+ degrees celcius and crashes.
 
Upvote 0 Downvote
M

mbnthat123

Commendable
Jan 28, 2017
54
0
1,630
I have the nzxt h440 with just all stock fans. My voltage is on 1.25, Ive managed so far 3.6ghz as for my ddr4 3200mhz only runs at 2666mhz, I cant make it run 3200mhz.

With this setup ive ran occt cpu: linpack for 1 hour no crash top temp 75C.
 
Upvote 0 Downvote
neblogai

neblogai

Distinguished
Apr 8, 2007
908
3
19,365
So you managed to get it stable? However temps are quite high- you are probably running default fan profile? My R5 1600, with stock cooler gets to 77C in Linpack, 3775MHz to be stable needs 1.35V in prime95 but 1.36V in Linpack. Fan is at 80-90% speed at those temps. I've also used Thermal Grizzly Hydronaut thermal paste for CPU, but my case, even with 2 fans, is old and has bad airflow. To get to 3.8GHz stable in Prime I need 1.39V, so I'll leave it at 3775@1.36V.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom