So I'm new to building Desktops but so far I've gotten everything in place. When everything was all hooked up I tried to boot into BIOS to install Windows 10 Home but my monitor isn't even receiving a signal. I've plugged in the 4/8-pin CPU power connector located near the CPU socket, processor is in correct spot,the front panel connectors are in the right place, graphics card is properly seated, standoffs are installed properly, tried two different RAM sticks in the two different slots that I have on my motherboard etc... When my desktop turns on all the LED's work and everything is getting power but for no reason I'm not getting a display. (BTW I'm running a HDMI to my monitor)
Here are my specs:
Asus Strix Radeon RX 470 OC Edition
Intel Core i3-6100 with included CPU cooler
Gigabyte GA-H110M-A micro-ATX motherboard
GSkill Ripjaws V 8GB x2
Rosewill Line-M
EVGA 430 W1
WD Caviar Blue 320GB
Anything helps
Here are my specs:
Asus Strix Radeon RX 470 OC Edition
Intel Core i3-6100 with included CPU cooler
Gigabyte GA-H110M-A micro-ATX motherboard
GSkill Ripjaws V 8GB x2
Rosewill Line-M
EVGA 430 W1
WD Caviar Blue 320GB
Anything helps
Facebook
Twitter
Instagram