hello, i just bought tl-wr841N , i plugged the cable correctly, im using utp cable from Wan port in the router to Lan port in Adsl modem. from the tp link web interface , i did the quick setup and choosed Dynamic IP from ISP, and changed the lan to 192.168.3.1(Basic 192.168.1.1) , From the wireless section i also tried to Turn on the ssid broadcast and bridge, but when i connect the wifi from phone, it appears , but i cant use it to open,for example google youtube etc. Any solution? sorry for my english
TL-WR841N ( TP - Link)
- Thread starter vortune
- Start date
- Jan 1, 2013
- 24,574
- 650
- 91,240
Plug the ADSL router into a yellow Ethernet port on the tplink not the blue wan port.
Them reset the settings on the tplink & setup your wireless network.the way you're doing it is wrong , there will be 2 DNS addresses & dchp conflicts.
Doing it the way I said uses the router solely as a wired/wireless access point.
You will have to set a second/seperate wireless network on the tplink this way but its far easier.
Them reset the settings on the tplink & setup your wireless network.the way you're doing it is wrong , there will be 2 DNS addresses & dchp conflicts.
Doing it the way I said uses the router solely as a wired/wireless access point.
You will have to set a second/seperate wireless network on the tplink this way but its far easier.
Okay, so we need to plug the cable to both Router on the LAN Port? Then should i do the quick setup from TP-LINK Web Interface? Because if i do the tp link quick setup it will say ,. The Cable didnt plugged in correctly. But if i didnt do the Quick Setup , this tp link just wont work. can you tell me step by step for it? Sorry for burdening you. But i am a Newbie Here. Thanks !
- Jan 1, 2013
- 24,574
- 650
- 91,240
Exactly the info above, reset the tplink with the reset button.
Plug it directly to the PC , login to it , change the into 192.168.111 (rarely ever used automatically & easy to remember), disable dchp.
Save setting s , disconnect.
Replug your ADSL router to pc.
Plug ADSL router Ethernet out to Ethernet on tplink.
You'll have a seperate wireless signal (the default one) off the bat this way, you can then login with 192.168.1.111 & change the wireless setup
Plug it directly to the PC , login to it , change the into 192.168.111 (rarely ever used automatically & easy to remember), disable dchp.
Save setting s , disconnect.
Replug your ADSL router to pc.
Plug ADSL router Ethernet out to Ethernet on tplink.
You'll have a seperate wireless signal (the default one) off the bat this way, you can then login with 192.168.1.111 & change the wireless setup
Latest posts
-
-
Question Automatically change FPS when using external monitor?- Latest: Roland Of Gilead
-
-
-
-
-
Facebook
Twitter
Instagram