Hi,
My motherboard is P5Q PRO...
Error: "USB device over current status detected shouting down in 15 seconds"...
I checked similar posts but there isn't enough information as far as I noticed.
I was re-heating solder of my sound ports, hoping to solve my sound on-off unstability due to ports.... But accidently made a scratch.
Was so hot, highly probably little melting happened inside the scratch, too... I cleaned it the picture is here:
https://scontent.fsaw1-8.fna.fbcdn.net/v/t1.0-9/18193773_1884991611781576_7927400732198254768_n.jpg?oh=f862a297688552d133d4d8e8efc0f6bb&oe=5980E555
I thought maybe a hardware way of disabling usb connections would work. I tried to plug off all usb jumper stuff but it didnt work.
I wonder if there is a known way to fixt this?
My motherboard is P5Q PRO...
Error: "USB device over current status detected shouting down in 15 seconds"...
I checked similar posts but there isn't enough information as far as I noticed.
I was re-heating solder of my sound ports, hoping to solve my sound on-off unstability due to ports.... But accidently made a scratch.
Was so hot, highly probably little melting happened inside the scratch, too... I cleaned it the picture is here:
https://scontent.fsaw1-8.fna.fbcdn.net/v/t1.0-9/18193773_1884991611781576_7927400732198254768_n.jpg?oh=f862a297688552d133d4d8e8efc0f6bb&oe=5980E555
I thought maybe a hardware way of disabling usb connections would work. I tried to plug off all usb jumper stuff but it didnt work.
I wonder if there is a known way to fixt this?