No beeps, No post, Display for 4 seconds only

emorris191145

Honorable
May 9, 2012
6
0
10,510
Hello everybody, I have a big problem with my new set-up as in I have power to motherboard but no beeps, no post, no display, but all fans are running and I do get a display for about 4 seconds telling me what graphics card is being used. Then screen goes blank and it starts over again. When there is no memory installed I get three short beeps, telling me that there is no memory. When using the on-board graphics I get no display at all. I have tried a different PSU and several memory sticks (including the ones in my other computer) in all dimms and combonations, to no avail. I have also tried with board not in case, nothing but the cpu, cpu fan, and memory hooked up. Any ideas would be helpful and appreciated, Thank you in advance, my specs. are as follows:
Motherboard: Asus P8Z77V-LK
CPU: Intel i7-2600
Memory: 2x Kingston 4gb x4315j-hyb
PSU: OCZ780MXS
SSD: Kingston 120gb ssdnow300
HHD: Seagate 1.5tb
 

emorris191145

Honorable
May 9, 2012
6
0
10,510
Sorry about the delay, but I have tried resetting the CMOS and again to no avail.
Also I quoted wrong on which motherboard I have (I have two) the one I'm inquiring about is a MSI Z77A-G43