overclocking not working as intended

Toggle sidebar Toggle sidebar
slyverine

slyverine

Reputable
Mar 4, 2016
789
0
5,360
Hello! My specs are at my signature. So , i had my cpu overclocked to 4.4 with 1.28V. This was done by a friends as i never overclocked before. After a BIOS update i tried to overclock myself.
I set AI overclock tuner to auto, then at core ratio i selected sync all cores and typed 44.For cpu core/cache voltage i selected manual and typed 1.28 in offset value.
So my problem is, my cpu is working at 1.296V and when stressed it goes to even 1.31. I want it to stay at 1.28 as i typed! Any idea what is wrong?
 
Sort by date Sort by votes
chemmajorp53

chemmajorp53

Dignified
Apr 5, 2013
3,160
1
15,010
Offset is for the voltage allowed above whatever Vcore you already have isn't it? I mean I could be wrong but what I'm assuming is that the number you're typing in means that the CPU is being limited to 1.28V above the standard Vcore, not to specifically to 1.28V. Vcore and offset are not the same thing.
 
Upvote 0 Downvote
Seanie280672

Seanie280672

Estimable
Mar 19, 2017
1,958
1
2,960


Try playing with the CPU load line calibrations, on my board, too loose an LLC and the voltage droops down, to tight and the voltage droops upwards as you've described, ive got mine set at level 3 on my board right now, where it seems to keep it pretty much at the voltage ive set, Level 1 on my board being the tightest where volatge rises, and level 8 being the loosest where volatge dramaticly droops.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom