- May 2, 2017
- 2
- 0
- 510
Hey there I'm having a real ussue with my brand new custom build.
I have the following setup:
MSI z270 SLI PLUS mobo
i7 7700k
16GB 3200 mhz corsair ram
samsung 256gb ssd
MSI nvidia 1070 8gb
The weird thing is, i ran it for a few days in test setup and it worked like a charm.
Today I installed it into the case. and all of a sudden it would not boot. fans came on led's came on but screen stayed black.
I didnt get what was wrong so i took everything out agian into the test setup.
Now as the video shows, all I get is flashing leds and the CPU led on the side is going on and off.
I removed everything and tried to use the onboard vga, still zero point zero result.
Checked for any bend pins (tho I havent removed the cpu at all during the transfer)
I tried the ram in different slots, tried 1, or 2, everything ends up in the same result.
The only possible thing I can come up with, is that maybe the power supply on the 8 pin might be broken or something?
here is the video: [video="https://www.youtube.com/watch?v=EtAOkZBf2Us&feature=youtu.be"]https://www.youtube.com/watch?v=EtAOkZBf2Us&feature=youtu.be[/video]
If you have any experience in this i would love you help!
Thank you in advance!
I have the following setup:
MSI z270 SLI PLUS mobo
i7 7700k
16GB 3200 mhz corsair ram
samsung 256gb ssd
MSI nvidia 1070 8gb
The weird thing is, i ran it for a few days in test setup and it worked like a charm.
Today I installed it into the case. and all of a sudden it would not boot. fans came on led's came on but screen stayed black.
I didnt get what was wrong so i took everything out agian into the test setup.
Now as the video shows, all I get is flashing leds and the CPU led on the side is going on and off.
I removed everything and tried to use the onboard vga, still zero point zero result.
Checked for any bend pins (tho I havent removed the cpu at all during the transfer)
I tried the ram in different slots, tried 1, or 2, everything ends up in the same result.
The only possible thing I can come up with, is that maybe the power supply on the 8 pin might be broken or something?
here is the video: [video="https://www.youtube.com/watch?v=EtAOkZBf2Us&feature=youtu.be"]https://www.youtube.com/watch?v=EtAOkZBf2Us&feature=youtu.be[/video]
If you have any experience in this i would love you help!
Thank you in advance!
Facebook
Twitter
Instagram