How to connect from one subnet to another

gpremsagar · May 3, 2017

I have server set on a campus and so have a few subnets running around. The server is on an ip 192.168.10.xxx that is connected via switch to another building and can be accessed via lan cable. I need access to that server via wifi using a wifi router that is on ip 192.168.0.1 . Is this possible? If so... all help will be highly appreciated.

nigelivey · May 3, 2017

No, not without assistance from the campus IT department. It is not possible for you to "route" traffic between different subnets without configuration changes on the wifi network, which I presume is out of your control?

gpremsagar · May 3, 2017

nigelivey :

gpremsagar · May 3, 2017

I have control over the network. So please direct me.

bill001g · May 3, 2017

Not sure how to even respond....you run the network but you do not even understand how to route between 2 subnets. This is as basic as it gets.

The actual answer depends on what equipment is between these devices. You may have to change multiple things.

gpremsagar · May 3, 2017

bill001g :

If I knew how to do it, I wouldn't have asked the question. If you know how to do it you should have just answered with the solution as I have already mentioned that there is a wifi router in between.

bill001g · May 3, 2017

Because I am not a mind reader and can not see how you cabled this stuff together.

You need a actual router to accomplish this. How exactly you hook it up depends on many things. If your so called wifi router is some consumer grade device used to hook the internet that will not work you need a actual router.

gpremsagar · May 3, 2017

bill001g :

Thank you.

Search

How to connect from one subnet to another

gpremsagar

Prominent

bill001g

nigelivey

Splendid

gpremsagar

Prominent

gpremsagar

Prominent

bill001g

Titan

gpremsagar

Prominent

bill001g

Titan

gpremsagar

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page