- Dec 29, 2015
- 51
- 0
- 18,540
Previously I had GTX 750 Ti, but I recently got a GTX 1050 Ti. I installed it last night, but when I connected it to my monitor, the monitor just behaved as though nothing was plugged in. I connected the DVI cable to the motherboard instead and it turned on. I checked DirectX and it said the device name was "Microsoft Driver" or something as opposed to "GTX 1050 Ti". I tried opening that one Nvidia program and it said that I needed an Nvidia graphics card to use it. I tried re-seating the card twice, it's fine. I tried using an HDMI cable and a DVI cable. I went into Device Manager and tried to find onboard graphics to disable, but I couldn't find anything to disable after looking thoroughly. I went into the BIOS and tried to change "Primary display" form 'Auto' to 'PCIE', but when I restarted not only did it not work, but when I went back it was switched back to auto. It does this with 'PCI', too, but it does not do it with 'iGPU' (as in it does not change back to Auto). The monitor will not turn on with any of these options selected when plugged into the GPU. I tried cleaning any dust out of the PCIE slot. I tried cycling the monitor through the HDMI, VGA, and DVI settings. Nothing works. I really don't think the GPU is broken as it is brand new and I handled it with care, and the fan is spinning like normal. Help, obviously. Thanks.
Graphics Card: EVGA GeForce GTX 1050 Ti
Motherboard: ASUS B85M-E/CSM
Monitor: This is most likely it: https://www.amazon.com/dp/B005BZNDOO/ref=cm_sw_r_cp_api_wQpezbQSKHGHH
OS: Windows 10 64-bit
Graphics Card: EVGA GeForce GTX 1050 Ti
Motherboard: ASUS B85M-E/CSM
Monitor: This is most likely it: https://www.amazon.com/dp/B005BZNDOO/ref=cm_sw_r_cp_api_wQpezbQSKHGHH
OS: Windows 10 64-bit
Facebook
Twitter
Instagram