I am building my first pc. The parts are:
CPU: Pentium g4560
Mobo: Gigabyte ga-h110m S2
RAM: 8gb 2133mhz ddr4
PSU: Thermaltake litepower 450w 80+
GPU: GTX 1050 Ti
Case: Circle CC-830
When I started building my pc my GPU had not arrived. So I Build my pc without the gpu and it was working find. I had installed all Intel HD 610 drivers.
When the GPU arrived, I inserted it, put the dvi cable to gpu slot and booted, my monitor was blank. The gpu was working the computer was booting (understood by seeing keyboard lights)
I removed the gpu went into Bios checked the gpu priority was pcie x1. Changed it to IGFX and then Chand back to pcie x1.
Still the dGPU wasn't working. So I went to Bios disabled the iGPU (default Auto)
Now I couldn't boot from either the gpu or the onboard graphics.
So, I reseted the CMOS. Now i can boot from iGPU but still my 1050ti isn't working.
Please help me out. Thanks in advance.
CPU: Pentium g4560
Mobo: Gigabyte ga-h110m S2
RAM: 8gb 2133mhz ddr4
PSU: Thermaltake litepower 450w 80+
GPU: GTX 1050 Ti
Case: Circle CC-830
When I started building my pc my GPU had not arrived. So I Build my pc without the gpu and it was working find. I had installed all Intel HD 610 drivers.
When the GPU arrived, I inserted it, put the dvi cable to gpu slot and booted, my monitor was blank. The gpu was working the computer was booting (understood by seeing keyboard lights)
I removed the gpu went into Bios checked the gpu priority was pcie x1. Changed it to IGFX and then Chand back to pcie x1.
Still the dGPU wasn't working. So I went to Bios disabled the iGPU (default Auto)
Now I couldn't boot from either the gpu or the onboard graphics.
So, I reseted the CMOS. Now i can boot from iGPU but still my 1050ti isn't working.
Please help me out. Thanks in advance.
Facebook
Twitter
Instagram