Soldered New Jack On, Now not working properly

Toggle sidebar Toggle sidebar
Jamlons

Jamlons

Commendable
Feb 11, 2017
4
0
1,510
Hey guys,

I recently replaced the jack for the HyperX Cloud Stinger headset as it was broken. I soldered it and have had experience before hand soldering but the headset plays no base in the right ear. Also when using a polarity check the left ear is head in the right, cheers for any problems solving it!.
 
Solution
Ralston18
Probably some wire mixup/reversal or a short in the soldering.

Unfortunately such products are not meant to be repaired/repairable even with good soldering skills.

Heat may have damaged some other part or area.

May need to cut off the new plug and try a "do-over".

Breadboard the headset wires to plug first (i.e., just temporary connections) to see if the headsets do indeed work as expected).

If again no bass right ear, there may be some other problem elsewhere.

Sort by date Sort by votes
Ralston18

Ralston18

Titan
Moderator
Oct 11, 2014
34,881
3,323
146,290
Probably some wire mixup/reversal or a short in the soldering.

Unfortunately such products are not meant to be repaired/repairable even with good soldering skills.

Heat may have damaged some other part or area.

May need to cut off the new plug and try a "do-over".

Breadboard the headset wires to plug first (i.e., just temporary connections) to see if the headsets do indeed work as expected).

If again no bass right ear, there may be some other problem elsewhere.

 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom