Cooler Master Hyper 212X will fit with my Gigabyte H61M-S1 motherboard?

Sunshine_95 · May 11, 2017

Hi just to be sure about something i want to ask that the cooler master hyper 212X will fit in my gigabyte h61m-s1 motherboard? Without blocking any slots like the PCI slot and ram slot?
Also i have corsair vengeance ram.

scout_03 · May 11, 2017

you have low profile ram it will fit also did you check if you have space in the case it need 160 mm .

Muzzammil22 · May 11, 2017

It will fit in it.

Check for yourself about the compatibility

Sunshine_95 · May 11, 2017

scout_03 :

I checked my case width its Zebronics Grill full tower (calculated it by measuring from outside,as it dont have proper specs) and its approx 17cm width.
Just to be clear its Corsair Vengeance 4GB X2 sticks ram that make it 8GB.

Karadjgne · May 11, 2017

Zebronics Grill is a ATX mid tower (not a full tower) that has a cpu cooler clearance of just 160mm. This means that the CoolerMaster Hyper212-X at 158mm will fit, barely. Ram height should not be an issue in slots #2,4.

Sunshine_95 · May 12, 2017

Karadjgne :

I have gigabyte h61m-s1 motherboard with only 2 ram slots it willl be ok?, I saw in some you tube video that if we remove some rubber bracket or something and attach fan then it wont touch ram is tht works? any chance?

Karadjgne · May 12, 2017

What that video basically did was allow the fan to be moved. Normally the fan sits slightly lower, equal to the top of the heatsink fins but has space below. The air moved below the tower blows across the heatsinking and other components around the base of the cooler. This helps keep the motherboard socket area a little cooler. But there is room for the fan to be raised slightly, several mm upto the top of the heatpipes (the little knobs on top) and not affect either motherboard cooling or cpu cooling to any degree. By raising the fan, it gives better clearance for ram when using the first slot nearest the cpu. On your board, the placement of the ram slots is similar to a 4 slot board, but in the area of slots #3,4 so is the furthest slots away. The cpu cooler fan shouldn't overlap your ram at all, and if it does, you can move that fan upwards @5mm and not impact performance.

scout_03 · May 12, 2017

did you also check this one as cooler similar to evo http://www.cryorig.com/h7.php

Sunshine_95 · May 12, 2017

Karadjgne :

What that video basically did was allow the fan to be moved. Normally the fan sits slightly lower, equal to the top of the heatsink fins but has space below. The air moved below the tower blows across the heatsinking and other components around the base of the cooler. This helps keep the motherboard socket area a little cooler. But there is room for the fan to be raised slightly, several mm upto the top of the heatpipes (the little knobs on top) and not affect either motherboard cooling or cpu cooling to any degree. By raising the fan, it gives better clearance for ram when using the first slot nearest the cpu. On your board, the placement of the ram slots is similar to a 4 slot board, but in the area of slots #3,4 so is the furthest slots away. The cpu cooler fan shouldn't overlap your ram at all, and if it does, you can move that fan upwards @5mm and not impact performance.

Thank you so much this cleared my doubt abt this fan,i think i can buy this now :bounce:

Sunshine_95 · May 12, 2017

scout_03 :

Tht cooler isnt available here..Thanks anyway

Karadjgne reply cleared my doubt abt the cooler master so i think i can go with it

Search

Cooler Master Hyper 212X will fit with my Gigabyte H61M-S1 motherboard?

Sunshine_95

Prominent

Karadjgne

scout_03

Titan

Muzzammil22

Respectable

Sunshine_95

Prominent

Karadjgne

Titan

Sunshine_95

Prominent

Karadjgne

Titan

scout_03

Titan

Sunshine_95

Prominent

Sunshine_95

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page