Aorus x370 gaming 5 ram issue

bigbearballew

Honorable
Aug 9, 2013
19
0
10,510
I have an aorus x370 gaming 5 motherboard (bios f5) with 16 gigs Corsair vengence lpx 3200mhz ram. The ram will only operate at 2133mhz and anytime I try to up it in the xmp profile to any setting higher than that the system will not boot. Does anyone have any idea how this might be solved?
 
Solution


You should be getting at least 2666mhz, its odd you are getting such a low speed. I think the BIOS flash is your answer.
Most people are getting 2998hz (3000hz) with that kit and board. 3200 will be if you are lucky. You might have to manually adjust to that. But flash to the latest BIOS via USB, and enable xmp and see what you get.

stephen_159

Prominent
May 15, 2017
4
0
520


I believe the newest BIOS just got released for that board from Gigabyte. I would flash to that, and keep xmp enabled and see what you get.

Did you get 2 x 8gb sticks or 1x16gb ? I believe 2x8gb has the best compatability for top speeds.
 

stephen_159

Prominent
May 15, 2017
4
0
520


You should be getting at least 2666mhz, its odd you are getting such a low speed. I think the BIOS flash is your answer.
Most people are getting 2998hz (3000hz) with that kit and board. 3200 will be if you are lucky. You might have to manually adjust to that. But flash to the latest BIOS via USB, and enable xmp and see what you get.
 
Solution

bigbearballew

Honorable
Aug 9, 2013
19
0
10,510
Yeah I'll be doing that. I have literally no experience overclock ram and no matter how much I read on it I still feel confused lol. Just something I'm having a difficult time grasping
 

stephen_159

Prominent
May 15, 2017
4
0
520


Hopefully with latest bios, xmp does the work for you, and you won't have to worry about it. The performance difference between 3000 and 3200 isn't really all that much. The difference between 2133 and 3000 is def noticeable.
 

iamacow

Admirable


Actually 2400@CL10 on the performance index is faster than 3000@CL14. If you cannot go higher, than just tighten up the timings and call it a day.
 

iamacow

Admirable
You don't really have to "overclock" the ram like the CPU these days. There is a whole tab dedicated to memory in the bios. But really, simply pick the speed you want and that's it. The system takes care of the rest. You can mess with the sub timmings and that is stuff you gotta do a lot a reading about and trail and error.
 

stephen_159

Prominent
May 15, 2017
4
0
520


Maybe that was correct before Ryzen, but the CPU and bridge is highly connected to Ram Speed, and the timings don't actually matter that much. https://www.eteknix.com/memory-speed-large-impact-ryzen-performance/ for reference. The general consensus to get the highest Ryzen performance is to push the Ram speed as fast as you can, and then tighten timings. Regardless he should be getting 2666 as that is supported by every board especially an x370 board. 99% The BIOS is his problem.

 

bigbearballew

Honorable
Aug 9, 2013
19
0
10,510
I just finished tinkering around with everything. I loaded my optimized defaults and pushed the multiplier up in the xmp tab. I've got the ram at 2933 mhz for now. The computer seems to be more responsive overall. Thanks everyone for your help!
 

eyupo92

Distinguished
Aug 23, 2010
165
0
18,860

eyupo92

Distinguished
Aug 23, 2010
165
0
18,860
Actually the original article shows a much worser situation.

I hated the tone used by AMD staff here.

https://www.forbes.com/sites/antonyleather/2017/05/18/an-interview-with-amd-the-latest-on-ryzen-memory-support-game-performance-and-ryzen-3s-launch/?c=0&s=GamingSales

They blame memory manufacturers not following JEDEC ( Intel complained about this 8 years ago ), programming wrong microcode into their overclock RAM, motherboard manufacturers using less copper and less layers on motherboards and finally claiming RAM above 2400 MHz are a specialty item etc etc.

And they are doing this after necessitating a RAM with above 2400 MHz for their CPU to perform as good as competition does without OC RAM. Tap dancing on their stupid hardware design failure and blaming the companies who created products that work even under these limitations. Great job.

Any further comment on this would let me banned from forum forever.