Check signal cable [SOLVED]

Storey · May 12, 2017

Hei guys, so yesterday i only removed my graphic card out to clean the dust of the fans. And after that i puttet it back in everything worked and today i was trying to start the computer and it only showed chech signal cable on the screen. So i have no idea what to do my graphic cards fans are turning,tryed to remove the batterie for 5mins still didint work. If anyone knows how to fix it please help me because i need to do some importent things
Thanks for answers have a nice day!

dotas1 · May 12, 2017

Make sure that your cable connecting monitor with GPU is firmly plugged in. You can also try reseating your GPU as it might not be all way in.

atljsf · May 12, 2017

did you cleaned the rest of the pc, including ram?

reseat ram and se if that helps

Storey · May 12, 2017

Hei yeah i tryed to reset the ram right now and it didint work still getting the same problem. but thx for answer

Storey · May 12, 2017

checked the all cables and reconected them and still geting the same issues

Storey · May 12, 2017

Can it be that motherboard is bad or something*??

dotas1 · May 12, 2017

Did you also reseat GPU as well? If you have integrated graphics, try using then to see if your monitor shows proper signal. If it does, you will be sure its something about your GPU

Storey · May 12, 2017

Well i plugged in my cable to my lapyop and changed the screen and now i van see that it works so it was problem with the cable that was going from graphic card to pc screen thx for the answer guys

Search

Check signal cable [SOLVED]

Storey

Prominent

dotas1

dotas1

Splendid

atljsf

Honorable

Storey

Prominent

Storey

Prominent

Storey

Prominent

dotas1

Splendid

Storey

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page