- May 14, 2017
- 1
- 0
- 510
Hey guys. I built my computer a few days ago and noticed a weird issue with the cpu voltage in different programs.
My build:
Ryzen 5 1600
ASRock AB350 Pro4 (2.50 bios update)
Geforce GTX 1050 ti
Corsair Vengeance 16gb 3200MHz (at 2933MHz as motherboard does not support 3200)
Corsair TX650 power supply
This is what I am seeing: https://i.imgur.com/xuTtgsn.jpg
Now, there are a lot of things in HWMonitor under the Voltage section that I am not 100% sure about. So if there is an issue there, please let me know, I would greatly appreciate that. Ryzen Master, the ASRock utility and the Bios say the voltage is at 1.21, but HWMonitor and CPU-Z are saying otherwise. I am not crashing or having any problems with my build. I am just really concerned with the discrepancy in the programs, especially since I have seen youtube videos that do not have this problem in their programs.
The core voltage in CPU-Z and HWMonitor is changing every few seconds, where in Ryzen Master it isn't moving a lot, if ever. This happens when I try overclocking and at stock. the voltage goes down a little at stock, but is still around 2.2 voltage in cpu-z
Please help!!
My build:
Ryzen 5 1600
ASRock AB350 Pro4 (2.50 bios update)
Geforce GTX 1050 ti
Corsair Vengeance 16gb 3200MHz (at 2933MHz as motherboard does not support 3200)
Corsair TX650 power supply
This is what I am seeing: https://i.imgur.com/xuTtgsn.jpg
Now, there are a lot of things in HWMonitor under the Voltage section that I am not 100% sure about. So if there is an issue there, please let me know, I would greatly appreciate that. Ryzen Master, the ASRock utility and the Bios say the voltage is at 1.21, but HWMonitor and CPU-Z are saying otherwise. I am not crashing or having any problems with my build. I am just really concerned with the discrepancy in the programs, especially since I have seen youtube videos that do not have this problem in their programs.
The core voltage in CPU-Z and HWMonitor is changing every few seconds, where in Ryzen Master it isn't moving a lot, if ever. This happens when I try overclocking and at stock. the voltage goes down a little at stock, but is still around 2.2 voltage in cpu-z
Please help!!
Facebook
Twitter
Instagram