Scratched two (maybe three) PCB tracks, possibility of repair?

Toggle sidebar Toggle sidebar
P

predspread

Reputable
May 21, 2015
2
0
4,510
Title. Did this while trying to get one of those [problematic] intel stock processors out of the board. The rig now powers on for around 2 seconds, beeps and resets, then repeats. The CPU fan turns around 5-10 degrees then stops and rotates back.

See below:

https://puu.sh/vRyiY/0640c01eef.JPG

Close-up:

http://puu.sh/vRzcb/7a16d794e0.jpg

I live in Liverpool and would really want to get this fixed. The board is an ASRock B85 Pro4.

Many thanks.

Watch the language please!
 
Solution
D
i would try getting all your hardware out and try to solder it. then keep expensive hardware out. put the stock cpu back in and try turning it on. if it runs and gets through basic function without error. put your parts back in and use it.
(using the basic cpu and parts is damage control. if things get shorted your parts can get destroyed)
Sort by date Sort by votes
D

Davidborn90

Prominent
May 16, 2017
4
0
520
i would try getting all your hardware out and try to solder it. then keep expensive hardware out. put the stock cpu back in and try turning it on. if it runs and gets through basic function without error. put your parts back in and use it.
(using the basic cpu and parts is damage control. if things get shorted your parts can get destroyed)
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom