Newly built PC - Aida64 hardware failiure when stress testing Memory

OathBound · May 17, 2017

When stress testing with AIDA64, after 10seconds I get a hardware failiure message. I narrowed it down to the memory, since testing the other components does not encounter such error. However, the ram testing always gets hardware failiure message.

Any idea how to fix this? Or is it a faulty memory in need of replacement?

PC Specs:

AMD Ryzen 1800x
ASUS PRIME x370 PRO
ASUS ROG GTX 1080
Corsair Vengeance LPX 2x16gb 3000hz
Corsair Rm1000x psu

Phillip Corcoran · May 17, 2017

As you guessed, most likely faulty memory in need of replacement.

Test each stick of RAM on it's own so you know which one(s) needs replacing:

MemTest86 V7.3 Free Edition: http://www.memtest86.com/download.htm

OathBound · May 17, 2017

I tested BOTH sticks at the same time using memtest86. Here are the results:

From what i understand, there are no errors whatsoever. What could cause the AIDA problems then?

Phillip Corcoran · May 18, 2017

1 pass is not sufficient - - errors (if present) won't usually show until after 3 or 4 passes at least.

Some people let it run all night with number of passes in double figures, but that's overkill, Errors (if present) usually show after 3 or 4.

If RAM still shows no errors, I've no idea what's wrong (or even if there is anything wrong).
I'm not a gamer & I don't stress or stress-test my system, not ever, so not qualified to give an opinion or advice beyond testing RAM..

Search

Newly built PC - Aida64 hardware failiure when stress testing Memory

OathBound

Reputable

Phillip Corcoran

Phillip Corcoran

Titan

OathBound

Reputable

Phillip Corcoran

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page