2-Bay NAS Storage Expansion

Ferguetteful

Commendable
Mar 21, 2016
3
0
1,510
I've recently filled up my 2-bay Synology NAS (DS 215j) containing of a 1TB and 3TB drive running in JBOD. The 3TB drive currently in my NAS was an upgrade to the previous 1TB drive (was also running in JBOD) and for me to safely replace the hard drive, I had to backup everything, swap out the drive and then move the files back to the NAS.

As I must admit, that process is far too tedious for me to do again so I've decide that I'm going to get a 4-Bay NAS. However, I do not know what should I do with my current one once I've received the new one.

Here are 2 options I've considered (other options welcome):

  • Sell current NAS
    Keep current NAS to use as monthly backup
Thank you in advance.
 
Solution
You can segregate functions. Use the 2 drive NAS for media and the 4 drive for backup. You can backup between the two units. You can use the 2 drive NAS with IP cameras. Or you can sell it.
I have both a 2 disk and 4 disk Synology NAS. The 2 disk unit is always in use, the 4 drive unit is allowed to spin the disks down and sleep.

kanewolf

Titan
Moderator
You can segregate functions. Use the 2 drive NAS for media and the 4 drive for backup. You can backup between the two units. You can use the 2 drive NAS with IP cameras. Or you can sell it.
I have both a 2 disk and 4 disk Synology NAS. The 2 disk unit is always in use, the 4 drive unit is allowed to spin the disks down and sleep.
 
Solution