Where should i plug in my water pump.

Toggle sidebar Toggle sidebar
LuckyXIIIGaming

LuckyXIIIGaming

Honorable
Aug 1, 2015
26
0
10,540
Okay so i have a corsair 60 and i read in the manual to plug it into a fan power plug. However i have an aio (all in one) im guessing; power plug i know if the fan fails the pc shuts off or water motor, but which should i use?
 
Solution
clutchc
Both of my machines with an H60 AIO are plugged into any header that I can have run at full speed (12v) at all times. You can use any fan header (3 pin or 4 pin) as long as you set it for full speed. It's best not to let that pump run on low voltage. If your board has a PSU fan header, that is another good candidate. Even using a Molex off the PSU directly is OK.

The of course, plug the rad fan into the CPU fan header.
Sort by date Sort by votes
clutchc

clutchc

Titan
Ambassador
Apr 22, 2009
43,150
411
131,790
Both of my machines with an H60 AIO are plugged into any header that I can have run at full speed (12v) at all times. You can use any fan header (3 pin or 4 pin) as long as you set it for full speed. It's best not to let that pump run on low voltage. If your board has a PSU fan header, that is another good candidate. Even using a Molex off the PSU directly is OK.

The of course, plug the rad fan into the CPU fan header.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom