HyperX Savage Memory Black DDR4 8GB, 2400MHz, DIMM, CL12
HX424C12SB2/8
work with this motherboard:
gigabyte ga-b250m-d2v
asrock b250m-hdv
msi b250m pro-vdh
work, think yes but work at 2400 and cl12?
because they are optimized for:
HyperX Savage DDR4 is tuned for Intel’s 100 Series chipset and X99 motherboards.
Intel XMP-ready profiles are optimized for Intel 100 series chipset and X99 motherboards.
so not sure if work at max frequency with b250 motherboard
HyperX Savage
DESCRIPTION
HX424C12SB2/8 8GB 1G x 64-Bit DDR4-2400 CL12 288-Pin DIMM
FEATURES
HyperX HX424C12SB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. Each module supports
Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
CL(IDD) 15 cycles
Row Cycle Time (tRCmin) 46.5ns (min.)
Refresh to Active/Refresh
Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 33ns (min.)
XMP TIMING PARAMETERS
•JEDEC: DDR4-2133 CL15-15-15 @1.2V
•XMP Profile #1: DDR4-2400 CL12-14-14 @1.35V
•XMP Profile #2: DDR4-2133 CL13-13-13 @1.2V
Savage DDR4
A lethal combo of easy overclocking, tremendous speeds and aggressive timings, HyperX® Savage DDR4 memory is engineered to complement Intel’s 2, 4, 6 or 8 core processors. HyperX Savage DDR4 rockets along at speeds up to 3000MHz with narrow latencies of CL12–CL15 — which buys you time to line up that perfect shot. With voltages as low as 1.2V, HyperX Savage DDR4 is an efficient boost to your machine. HyperX Savage DDR4 is tuned for Intel’s 100 Series chipset and X99 motherboards and is available in single modules and kits of 2, 4 and 8 in capacities up to 128GB.
HX424C12SB2/8
work with this motherboard:
gigabyte ga-b250m-d2v
asrock b250m-hdv
msi b250m pro-vdh
work, think yes but work at 2400 and cl12?
because they are optimized for:
HyperX Savage DDR4 is tuned for Intel’s 100 Series chipset and X99 motherboards.
Intel XMP-ready profiles are optimized for Intel 100 series chipset and X99 motherboards.
so not sure if work at max frequency with b250 motherboard
HyperX Savage
DESCRIPTION
HX424C12SB2/8 8GB 1G x 64-Bit DDR4-2400 CL12 288-Pin DIMM
FEATURES
HyperX HX424C12SB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. Each module supports
Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
CL(IDD) 15 cycles
Row Cycle Time (tRCmin) 46.5ns (min.)
Refresh to Active/Refresh
Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 33ns (min.)
XMP TIMING PARAMETERS
•JEDEC: DDR4-2133 CL15-15-15 @1.2V
•XMP Profile #1: DDR4-2400 CL12-14-14 @1.35V
•XMP Profile #2: DDR4-2133 CL13-13-13 @1.2V
Savage DDR4
A lethal combo of easy overclocking, tremendous speeds and aggressive timings, HyperX® Savage DDR4 memory is engineered to complement Intel’s 2, 4, 6 or 8 core processors. HyperX Savage DDR4 rockets along at speeds up to 3000MHz with narrow latencies of CL12–CL15 — which buys you time to line up that perfect shot. With voltages as low as 1.2V, HyperX Savage DDR4 is an efficient boost to your machine. HyperX Savage DDR4 is tuned for Intel’s 100 Series chipset and X99 motherboards and is available in single modules and kits of 2, 4 and 8 in capacities up to 128GB.
Facebook
Twitter
Instagram