Workstation for rendering

Madhacker27

Prominent
May 21, 2017
5
0
510
Hi, i am confused with pc configuration, i am going with cpu ryzen 5 1600x other components, of what specs, i dont know how to decide for rendering, i want to know the configuration of pc with ryzen 1600x under 900$ or 60000 rupees
 
Solution
Use a 1600 (non x it'll oc to the same level and save you some rupees) 16gb memory and whatever gpu will fit in the budget after motherboard/hard drive/case/power supply


Madhacker,

If you are using CPU rendering, consider a Ryzen 7 8-core 1700, but if the rendering is all GPU, you can use a 4-core Ryzen 3 or fast Intel i7. A lot of rendering today however, are "hybrid", using both CPU and GPU and in fact I use different programs that use both.

My approach to a CPU rendering system has been to upgrade a used workstation with a lot of cores:

Purchased for US: $270

HP z620_1 (Original) Xeon E5-1620 4-core @ 3.6 /3.8GHz) / 8GB (1X 8GB DDR3-1333) / AMD Firepro V5900 (2GB) / Seagate Barracuda 750GB + Samsung 500GB + WD 500GB
[ Passmark System Rating= 2408 / CPU= 8361 / 2D= 846 / 3D = 1613 / Mem =1584 / Disk = 574 ] 7.13.16

Upgrades. about $1,100:

HP z620_1 (2012) (Rev 3) 2X Xeon E5-2690 (8-core @ 2.9 / 3.8GHz) / 64GB DDR3-1600 ECC reg) / Quadro K2200 (4GB) + Tesla M2090 (6GB) / HP Z Turbo Drive (256GB) + Samsung 850 Evo 250GB + Seagate Constellation ES.3 (1TB) / Creative Sound Blaster X-Fi Titanium PCIe sound card + Logitech z313 2.1 speakers / 800W / Windows 7 Professional 64-bit > > HP 2711x (27" 1980 X 1080)
[ Passmark System Rating= 5675 / CPU= 22625 / 2D= 815 / 3D = 3580 / Mem = 2522 / Disk = 12640 ] 9.25.16 Single Thread Mark = 1903
[ Cinebench R15: CPU = 2209 cb / Single core 130 cb / OpenGL= 119.23 fps / MP Ratio 16.84x] 10.31.16

That is closer to INR 90000 total but that's the idea for
CPU rendering> 16 cores /32. threads at up to 3.8GHz- 3.4GHz on all cores.

The Previous rendering system:

For $171:

Dell Precision T5500 (2011) (Original): Xeon E5620 quad core @ 2.4 / 2.6 GHz > 6GB DDR3 ECC Reg 1333 > Quadro FX 580 (512MB) > Dell PERC 6/i SAS /SATA controller > Seagate Cheetah 15K 146GB and 300GB > Windows 7 Professional 64-bit
[ Passmark system rating = 1479 / CPU = 4067 / 2D= 520 / 3D= 311 / Mem= 1473 / Disk= 1208]

+$900

Dell Precision T5500 (2011) (Revised) > 2X Xeon X5680 (6-core @ 3.33 / 3.6GHz), 48GB DDR3 1333 ECC Reg. > Quadro K2200 (4GB ) > PERC H310 / Samsung 840 250GB + WD RE4 Enterprise 1TB > M-Audio 192 sound card > Logitech z313 > 875W PSU > Windows 7 Professional 64> HP 2711x (27", 1920 X 1080)
[ Passmark system rating = 3844 > CPU = 15047 / 2D= 662 / 3D= 3550 / Mem= 1785 / Disk= 2649] (12.30.15)

I like used workstations as they are made to run reliably for long periods under high CPU load- and also quietly.

Cheers,

BambiBoom

HP z620_2 (2017) > Xeon E5-1680 v2 (8-core@ 4.1GHz) / 64GB DDR3-1866 ECC Reg / Quadro P2000 5GB / HP Z Turbo Drive M.2 256GB + Intel 730 480GB + Seagate Constellation ES.3 1TB / ASUS Essence STX PCIe sound card / 825W PSU / Windows 7 Prof.’l 64-bit > 2X Dell Ultrasharp U2715H (2560 X 1440) / Logitech z2300 2.1 Sound

[Passmark Rating = 6166 / CPU rating = 16934 / 2D = 820 / 3D= 8849 / Mem = 2991 / Disk = 13794] 4.24.17 Single Thread Mark = 2252