Gigabyte GA-Z77X-D3H (1.0)

Scott_172

Prominent
May 29, 2017
1
0
510
I just purchased NVIDIA 1060GTX to upgrade my 650 GTX,

current system information:
Windows 10 Pro
i7-3770 3.4GHz
24 GB RAM
650 Watt power
BIOS version F5

Ran all UDD and that worked, then
When I install the 1060 it's stuck on the bios screen tries 3 times then black screen

I am figuring that since I'm on a pretty old BIOS Version, that may be the culprit, however, a couple questions, where do I DL the newest bio (I can't for the life of me find it on the GIGABYTE site), and I've read a lot of posts of different versions of BIOS, what one am I supposed to use?

If it's not the BIOS any thoughts on what I need to do?

Thank you for any thoughts.
 
Jan 3, 2019
5
0
10


Hi Scott, i have a very similar question and i want to know if the BIOS update worked for you or what did you do at the end? this is my case, as you can see it´s pretty similar:

I just purchased NVIDIA GTX 1050ti to upgrade my old gtx 550,

current system information:
motherboard "Gigabyte GA-Z77X-D3H (1.0)" .....OLD i know
Windows 10 Pro 64 bits
Intel i7-2600k 3.40 GHz
16 GB RAM DDR3
850 Watt CoolerMaster Silent Pro M
BIOS version F7

When I install the CARD it's stuck on the bios screen, NOT RESPONDING, several times.

I am figuring that since I'm on a pretty old BIOS Version, that may be the culprit, however, a couple questions, i checked the gigabyte site and i found several:
https://www.gigabyte.com/Motherboard/GA-Z77X-D3H-rev-10#support-dl-bios
I´m downloading the latest that´s not a BETA, which is the F16 (on the F14 there´s a VGA compatibility note, so i´m guessing F16 is better)

If it's not the BIOS any thoughts on what I need to do?

Thank you for any thoughts.

A very similar question was asked by
Scott_172
on May 29, 2017, 6:57 PM
but he didn´t replied if it worked.

THANKS!!
___