M.2 SDD not running correctly.

Toggle sidebar Toggle sidebar
O

Overclockerastro

Reputable
Jul 28, 2015
42
0
4,530
Ok so after doing some bench marks. it's telling me my m.2 drive is under performing compared to people with the exact same ssd.

Heres a screenshot of what i mean. Don't mind the the gpu part because i fixed that.

http://imgur.com/18eGiIb

But the ssd is the only thing that seems to be not as fast as on paper.

Running windows 10. ryzen 1700. Motherboard is x370 sli plus.

Would ram speeds be the issue?

Thanks.

Update; This windows install is not a fresh one so that could be the issue.
Would 32gbs of ram be taking the pcie lanes and making it run at a slower speed??????
 
Sort by date Sort by votes
R

rhysiam

Splendid
Mar 24, 2013
4,366
29
26,990
I wouldn't really lend much credence to 3rd party benchmarking tools like that. It's just a SATA SSD in M.2 form factor, so it's not using any PCIe lanes, it's just talking to the SATA controller.
Just FYI that your RAM and CPU are connected together over an entirely different interface, so there's no impact on PCIe lanes from RAM, and vice-versa.

Download the Crucial Storage Executive and check out everything there. You can use that to update the drive's firmware if there is a newer version available. That might help.
There's a chance the particular test used by that benchmark runs better on an Intel SATA controller than AMD's. I don't know to be honest. But in any case, I would trust Crucial's own software to tell you if there's a problem.
 
Upvote 0 Downvote
O

Overclockerastro

Reputable
Jul 28, 2015
42
0
4,530
Momentum cache? What is this and should i use it. its in the software and says it would help overall performance

btw here is the smart data


ID Description Attribute Data Units
1 Raw Read Error Rate 0 Errors/Page
5 Reallocated NAND Block Count 0 NAND Blocks
9 Power On Hours Count 111 Hours
12 Power Cycle Count 137 Power Cycles
171 Program Fail Count 0 NAND Page Program Failures
172 Erase Fail Count 0 NAND Block Erase Failures
173 Block Wear-Leveling Count 2 Erases
174 Unexpected Power Loss Count 103 Unexpected Power Loss events
180 Unused Reserved Block Count 8783 Blocks
183 SATA Interface Downshift 0 Downshifts
184 Error Correction Count 0 Correction Events
187 Reported Uncorrectable Errors 0 ECC Correction Failures
194 Enclosure Temperature 41 Current Temperature (C)
65 Highest Lifetime Temperature (C)
196 Reallocation Event Count 0 Events
197 Current Pending ECC Count 0 ECC Counts
198 SMART Off-line Scan Uncorrectable Errors 0 Errors
199 Ultra-DMA CRC Error Count 0 Errors
202 Percentage Lifetime Remaining 100 % Lifetime Remaining
206 Write Error Rate 0 Program Fails/MB
210 RAIN Successful Recovery Page Count 0 TUs successfully recovered by RAIN
246 Cumulative Host Sectors Written 3355109570 512 Byte Sectors
247 Host Program Page Count 105063856 NAND Page
248 FTL Program Page Count 22178089 NAND Page
 
Upvote 0 Downvote
O

Overclockerastro

Reputable
Jul 28, 2015
42
0
4,530
heres a new bench i did

AS SSD Benchmark 1.9.5986.35387
------------------------------
Name: Crucial_CT1050MX300SSD4
Firmware: M0CR050
Controller: storahci
Offset: 513024 K - OK
Size: 978.09 GB
Date: 5/30/2017 12:46:47 AM
------------------------------
Sequential:
------------------------------
Read: 417.30 MB/s
Write: 348.16 MB/s
------------------------------
4K:
------------------------------
Read: 25.44 MB/s
Write: 70.74 MB/s
------------------------------
4K-64Threads:
------------------------------
Read: 287.46 MB/s
Write: 237.70 MB/s
------------------------------
Access Times:
------------------------------
Read: 0.119 ms
Write: 0.045 ms
------------------------------
Score:
------------------------------
Read: 355
Write: 343
Total: 884
------------------------------
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom