Hi all,
I recently had my GPU blow up, catch on fire and have put in an intermediary card from a friend for now. I would like to know if there is anything I can test or run in BIOS to check if the system is running ok or possibly do load tests or similar?
I am weary of buying a new GPU at the higher end and putting it into my system if I dont know if it was definately not a faulty PSU etc.
any help is greatly appreciated.
__________________________________________________
Power supply:
Enermax, revolution 85+ (1020W)
(Pins going to gfx are 2x 6+2 pin)
Chip:
Intel core i5 processor
4670K (Lga1150)
Motherboard:
Gigabyte, G1 Killer, G1.Sniper Z87
(Lga1150)
RAM:
Corsair Vengeance 2 x 8gb sticks
GFX:
Stand-in job at current (GTX560)
Drives:
1x WD 1tb
1x Samsung 500gb ssd
Tower:
AeroCool, PgS B. (Plenty of room)
Fans;
150mm at front intake, 150mm in roof extracting, 120mm at rear extracting, 2x 100mm fans on side intake.
I recently had my GPU blow up, catch on fire and have put in an intermediary card from a friend for now. I would like to know if there is anything I can test or run in BIOS to check if the system is running ok or possibly do load tests or similar?
I am weary of buying a new GPU at the higher end and putting it into my system if I dont know if it was definately not a faulty PSU etc.
any help is greatly appreciated.
__________________________________________________
Power supply:
Enermax, revolution 85+ (1020W)
(Pins going to gfx are 2x 6+2 pin)
Chip:
Intel core i5 processor
4670K (Lga1150)
Motherboard:
Gigabyte, G1 Killer, G1.Sniper Z87
(Lga1150)
RAM:
Corsair Vengeance 2 x 8gb sticks
GFX:
Stand-in job at current (GTX560)
Drives:
1x WD 1tb
1x Samsung 500gb ssd
Tower:
AeroCool, PgS B. (Plenty of room)
Fans;
150mm at front intake, 150mm in roof extracting, 120mm at rear extracting, 2x 100mm fans on side intake.